Fitting Front Wheel - KTM 1190 RC8 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Fitting front wheel

x
9.44
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean screw
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
200487-10
Guideline
Screw, front wheel spindle
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount and tighten screws
Guideline
Screw, front brake caliper
–
Operate the hand brake lever several times until the brake pads are lying correctly on
the brake disc.
–
Take the front of the motorcycle off the work stand. (
700271-12
–
Take the rear of the motorcycle off the work stand. (
and wheel spindle .
 
.

.

M10x1.25
M25x1.5 45 Nm
(33.2 lbf ft)
45 Nm Loctite ®
(33.2 lbf ft)
p. 96)
p. 97)
138
243™