Operation Interface - Planet GRT-101 User Manual

The default IP address is 192.168.0.1.

10.3 Operation Interface

For serial console and Telnet management, the Router implements two operational interfaces:
Command Line Interface (CLI) and menu driven interface. The CLI mode provides users a
simple interface, which is better for working with script file. The menu driven interface is a
user-friendly interface to general operations. The command syntax for CLI is the same as that
of the menu driven interface. The only difference is that the menu driven interface shows you
all of available commands for you to select. You don't need to remember the command syntax
and save your time on typing the whole command line.
The following figure gives you an example of the menu driven interface. In the menu, you scroll
up/down by pressing key I / K , select one command by key L , and go back to a higher
level of menu by key J .
For example, to show the system information, just logon to the Router, move down the cursor
by pressing key K twice and select "show" command by key L , you will see a submenu and
select "system" command in this submenu, then the system will show you the general
information.
GRT-101/401/402 User's Manual
102 - -
G.SHDSL Bridge/Router