G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
5.8 STP
This information shows the STP parameter:
The bridge parameters have:
Bridge ID: The bridge ID of a configuration message is an 8-byte field. The six low order bytes
are the MAC address of the switch. The high order two-byte (unsigned 16-bit integer) field is
the bridge priority number.
Designated Root ID: The unique Bridge Identifier of the Bridge assumed to be the Root, this
parameter is used as the value of the Root Identifier parameter in all CBPDUs transmitted by
the Bridge.
Root Port: Identifies the Port through which the path to the Root is established, and is not
- -
73