For example, to set up WAN1, type 1 on interface number.
----------------------------------------------------------------------
Command: setup wan <1~8>
Message: Please input the following information.
Interface number <1~8>: 1
----------------------------------------------------------------------
>> protocol
address
vpi_vci
encap
qos
isp
ip_type
list
WAN parameter:
WAN interface number(1~8)
Protocol
Address
VC
Encap
QoS
ISP
IP Type (PPPoA or PPPoE)
10.16.3.1 Protocols
There are four types of protocols, IPoA, EoA, PPPoA and PPPoE, which you can set up.
.
10.16.3.2 IP Address
For dynamic IP of PPPoA and PPPoE, you do not need to set up IP address and subnet mask.
10.16.3.3 VPI / VCI
There are unique VPI value and VCI value for Internet connection supported by ISP. The range
of VIP is from 0 to 255 and VCI from 0 to 65535.
VPI (Virtual Path Identifier) : for set up ATM Permanent Virtual Channels(PVC).
VCI (Virtual Channel Identifier) : for set up ATM Permanent Virtual Channels(PVC).
10.16.3.4 Ecapsulation
There are two types of encapsulation, VC-Mux and LLC.
Link type protocol
IP address and subnet mask
Configure VPI/VCI value
Configure encapsulation type
Configure VC QoS
Configure account name, password and idle time
Configure IP type in PPPoA and PPPoE
WAN interface configuration
□Disable
□Ethernet
IP
Mask
VPI
VCI
□
VC-Mux
□
□
UBR
CBR
PCR
SCR
MBS
Name
Password
Idle Timeout
□
Dynamic
GRT-101/401/402 User's Manual
□PPPoA
□
LLC
□
□
rt-VBR
nrt-VBR
□
□
Fixed
Unnumbered
126
- -
G.SHDSL Bridge/Router
□IPoA
□PPPoE