Planet GRT-101 User Manual page 137

You can view the global IP address range via list command.
Fixed IP address mapping
To modify fixed IP address mapping, move the cursor ">>" to fixed command and press enter.
virtual
global
>> Fixed
>> modify
interface
delete
list
You can create up to 10 fixed NAT mapping entry via modify command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed modify <1~10> <ip> <ip>
Message: Please input the following information.
Fixed NAT mapping entry number <1~10>: 1
Local address: 192.168.0.250
Global address: 122.22.22.2
----------------------------------------------------------------------
Fixed Address Mapping:
Local Address
1
2
3
4
5
6
7
8
9
10
After configuration fixed IP address entry, you can bind the entry to specific interface via
interface command.
----------------------------------------------------------------------
Command: setup ip_share nat fixed interface <1~10> <1~8>
Message: Please input the following information.
Fixed NAT mapping entry number <1~10>: 1
Active interface number (Enter for default) <1~8>: 1
----------------------------------------------------------------------
Fixed NAT Mapping:
Mapping entry number
1
2
3
4
5
6
7
Virtual IP address pool
Global IP address pool
Fixed IP address mapping
Modify fixed NAT mapping
Bind address pair to specific interface
Delete fixed NAT mapping
Show fixed IP address mapping
Global Address
Active Interface number(1~8)
GRT-101/401/402 User's Manual
137 - -
G.SHDSL Bridge/Router