Planet GRT-101 User Manual page 107

WAN status shows all their parameters including IP address ,Net mask, PVC and
wan
protocol information
route You can see the routing table via route command.
The statistic status of WAN and LAN interface can be monitor by interface
interface
command.
firewall Show firewall status ( for firewall models only)
Ip_qos Show IP QOS status
stp Show the STP status on all LANs and WANs
clear Clear all statistics data
10.8.1 Shdsl.bis
Move cursor " >> " to shdsl.bis and press enter.
If the Router is 4-wire model, it will show two channels' status as follows:
-----------------------------------------------------------------------------
Monitoring Window...
<SHDSL.bis Status>
Channel
SHDSL.bis Mode
Line Rate(n*64)
Current SNR Margin
Attenuation
CRC Error Count
SHDSL Remote Side Status
Channel
Current SNR Margin
Attenuation
CRC Error Count
-----------------------------------------------------------------------------
If the Router is a 2-wire model, it will show one channel's status as follows:
-----------------------------------------------------------------------------
Monitoring Window...
<SHDSL.bis Status>
: A / B
: CPE Side / CPE Side
: 0kbps / 0kbps
: 0dB / 0dB
: 0dB / 0dB
: 0 / 0
: A / B
: 0dB / 0dB
: 0dB / 0dB
: 0 / 0
- - 107
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual