Planet GRT-101 User Manual page 120

synchronize with PC, the router will synchronize with PC. If you choose SNTPv4, the router will
use the protocol to synchronize with the time server. Synchronization with time server, SNTP
v4, needs to configure service, time_server and time_zone. Synchronization with PC does not
need to configure the above parameters.
Move the cursor " >> " to sntp and press enter.
>> method
service
time_server1
time_server2
time_server3
updaterate
time_zone
list
To configure SNTP v4 time synchronization, follow the below procedures.
move the cursor to method and press enter.
----------------------------------------------------------------------
Command: admin sntp method <SNTPv4|SyncWithPC>
Message: Please input the following information.
SYNC method (Enter for default) <SyncWithPC> : SNTPv4
----------------------------------------------------------------------
Move the cursor to service and press enter.
----------------------------------------------------------------------
Command: admin sntp service <Disable|Enable>
Message: Please input the following information.
Active SNTP v4.0 service (Tab Select) <Enable> : Enable
----------------------------------------------------------------------
Move the cursor to time_server1 and press enter.
----------------------------------------------------------------------
Command: admin sntp time_server1 <string>
Message: Please input the following information.
Time server address (Enter for default) <ntp-2.vt.edu> : ntp-2.vt.edu
----------------------------------------------------------------------
You can configure three time servers in this system with time_server1, time_server2 and
time_server3.
The default time servers are the following:
time_server1 : ntp-2.vt.edu
time_server2 : ntp.drydog.com
time_server3 : ntp1.cs.wisc.edu
Move the cursor to update_rate and press enter.
----------------------------------------------------------------------
Command: admin sntp update_rate <10~268435455>
Message: Please input the following information.
Select time synchronization method
Tigger SNTP v4.0 service
Configure time server 1
Configure time server 2
Configure time server 3
Configure update period
Configure GMT time zone offset
Show SNTP configuration
GRT-101/401/402 User's Manual
120 - -
G.SHDSL Bridge/Router