Planet GRT-101 User Manual page 136

NAT (Virtual IP address and range)
Base Address
1
2
3
4
5
You can delete virtual IP address range from 1 to 5 by using delete command.
You can view the virtual IP address range via list command.
Global IP address pool
To set up global IP address pool, move the cursor ">>" to global command and press enter.
>> range
interface
delete
list
You can create five global IP address pool range via range command.
----------------------------------------------------------------------
Command: setup ip_share nat global range <1~5> <ip> <1~253>
Message: Please input the following information.
NAT global IP address range entry number <1~5>: 1
Base address: 122.22.22.2
Number of address: 3
----------------------------------------------------------------------
After configuration global IP address range, you can bind address pool to specific interface via
interface command.
NAT (Global IP Address and range):
Base Address
1
2
3
4
5
----------------------------------------------------------------------
Command: setup ip_share nat global interface <1~5> <1~8>
Message: Please input the following information.
NAT global ddress range entry number <1~5>: 1
Active interface number <1~8>: 1
----------------------------------------------------------------------
You can delete global IP address range from 1 to 5 by using delete command.
Number of Address
Edit global IP address pool
Bind address pool to specific interface
Delete global IP address pool
Show global IP address pool
Number of Address
GRT-101/401/402 User's Manual
Active Interface Numbe(1~8)
136 - -
G.SHDSL Bridge/Router