Security - Planet GRT-101 User Manual

The screen will prompt as follows:
------------------------------------------------------------------------
Command: admin user modify 5 profile <name> <pass_conf>
Message: Please input the following information.
Legal user name (ENTER for default) <admin>: superman
Input the old Access password: ****
Input the new Access password: ****
Re-type Access password: ****
------------------------------------------------------------------------
For example, set up the legal user name is "superman" and access password is"1234",and use
write command to store on NVRAM.
Finally, you can use list command to check the listing of five profiles including on user name
and their UI mode. Next time when you re-enter this system, you can use this set of username
and password. You can set up a maximum of five profiles, i.e five sets of usernames and
passwords.
User: superman
Password: ****
User Profile
User profile User name
1
2
3
4
5
For example, when using the command list, the screen will prompt as follows:
------------------------------------------------------------------------
Legal Access User Profile
No User Name
---- ------------------ -----------
1 test
2 test-1
3 test-2
4 test-3
5 superman
------------------------------------------------------------------------

10.13.2 Security

Security command can be configured as sixteen legal IP addresses for telnet access and
telnet port number.
Move the cursor " >> " to security and press enter. The default legal address is 0.0.0.0. It
means that there is no restriction of IP to access the router via telnet.
Password
□Menu
□Menu
□Menu
□Menu
□Menu
UI Mode
Menu
Menu
Command
Command
Menu
- - 115
G.SHDSL Bridge/Router
GRT-101/401/402 User's Manual
Attrib
□Command
□Command
□Command
□Command
□Command