Hinge Assembly - Sony Handycam DCR-PC115 Service Manual

DCR-PC115/PC115E/PC120BT/PC120E

2-16.HINGE ASSEMBLY

(Remove the LCD unit referring to section 2-15 before starting disassembling.)
The +P2 (0-No.) screws (M1.7 × 2.5) are MEC-processed. If the screws that are once removed,
Note:
are re-used, the screws may be loosened.
When re-assembling the mechanism, use the new +P2 (0-No.) screws (M1.7 × 2.5).
Strobe unit
2
Two screws
1
(M1.7 × 2.5),
lock ace, p2
qs
Hinge cover (upper)
q;
Two screws
3
(M1.7 × 2.5),
lock ace, p2
Hinge assembly
9 Three claws
PRECAUTION DURING FP-387 FLEXIBLE
BOARD INSTALLATION (2)
Give the folding line along with
the hinge cover (lower) while
taking care so that the portion
A is not loosened.
FP-387 flexible
4
board
Hinge cover
(lower)
FP-387 flexible board
7
5
8
qa Harness (PT-128)
2-14
Be careful that the margin
between the flexible board
and the hinge cover (lower)
is around 1 mm.
A
Screw
(M1.7 × 2.5),
0-No, +p2
(Note)
6 Claw
Hinge cover (lower)