Hinge Assembly, Fp-733 Flexible Board - Sony DCR-IP1 Service Manual

2-9. HINGE ASSEMBLY, FP-733 FLEXIBLE BOARD

3 Paying attention to the
FP-733 flexible board,
remove the hinge assembly.
2 Two screws
(M1.7 4)
X
qa Rotate the FP-733 flexible board
in the arrow A direction to remove,
which winds around the hinge assembly.
0 Remove an H-shaped part of the
FP-733 flexible board from the hinge assembly.
1
6 Screw (M1.7
A
qs Remove the flexible clamper
from the hinge assembly.
qd Hinge assembly
qf Remove the IC7301 part
from the flexible clamp.
qj FP-733 flexible board
2-9
4)
X
8 Hinge cover (rear)
7 Two claws
9 Magnet
4 Two claws
qg Four claws
qh Flexible clamp
DCR-IP1/IP1E
5 Hinge cover (front)