Board, Lens Device - Sony Handycam DCR-PC115 Service Manual

DCR-PC115/PC115E/PC120BT/PC120E
2-5. VM-027 BOARD
Screw
2
(M1.7 × 2.5),
lock ace, p2
Two tapping screws
3
(M1.7 × 3)
Screw
4
(M1.7 × 2.5),
lock ace, p2
qd Two claws
2-6. CD-349 BOARD, LENS DEVICE
1 CD-349 board (72P)
(Note)
Drum or Pinch arm
of Mechanism deck
5
VM-027
1
board (88P)
(Note)
Drum or Pinch arm
of Mechanism deck
qf Light guide plate block,
LCX033AN-1, etc
qg VM-027 board,
VM guard sheet
9 Lens device,
CD-349 board, etc
8 Claw
Note: If the drum or pinch arm of mechanism deck is pressed down,
the mechanism deck may not work correction.
Also if you touch the "B" portion of the chassis of the mechanism
deck as shown in the illustration, grease will adhere your hands.
When inserting the connector (88P) of the VM-027 board and the
connector (72P) of the CD-349 board into the VC-270 board
connectors, hold the "A" block of the chassis or the cassette
compartment cover of mechanism deck and insert them.
VC-270 board
VM-027 board (88P)
"B" of the
chassis
"A" of the
chassis
Cassette compartment cover
8 VF Frame (B)
Two precision screws
7
(dia,1.7 × 4)
qs
3 FK flexible guard
Screw
2
(M1.7 × 2.5),
Screw
7
(M1.7 × 2.5),
lock ace, p2
lock ace, p2
4 Control switch block
(MF-30550) (8P)
5 Two dowels
2-8
Drum or Pinch arm of
Mechanism deck
CD-349 board (72P)
"B" of the
chassis
"A" of the
chassis
Mechanism deck
Screw
6
(M1.7 × 2.5),
lock ace, p2
9
VF lens assembly,
qa
Sleeve assembly,
VF regulation ring
q; Two claws
6 MF base assembly,
Control switch block
(MF-30550),
IR window assembly