Sony Handycam DCR-PC115 Service Manual page 71

DCR-PC115/PC115E/PC120BT/PC120E
[Routing the Bluetooth BT cable] (PC120BT/PC120E)
BT cable
1 Pass the cable through the hole A of the
Cabinet (R) section.
Route the cable through the
clearance B , and then hook
it on the clearance between
the BT cable guide and
lens device.
BT cable
BT cable
Lens device
guide
BT-003 board
BT cable
B
6 Route the cable through the clearance B .
7 Insert it to the connector on the BT-003 board.
A
When removing the BT cable
from the BT-003 board, be sure
to hold the connector of the
BT-003 cable and remove it.
BT-003
board
Connector of
BT cable
Attach the BT cable so
that it stretches straight
downward.
BT cable
guide
Rigid portion of the
BT cable
FJ-035 board
Flexible board of
the FJ-035 board
2 Draw the cable through clearance of the flexible
board of the FJ-035 board and route it under the
flexible board of the FJ-035 board.
3 Route the cable under the rigid portion of the
FJ-035 board.
BT cable
sheet
BT cable
4 Insert it into the notch of the lens rubber (R).
5 Insert it into the notch of the BT cable sheet.
2-2
Lens
rubber (R)