Hinge Assembly - Sony DCR-IP45 Service Manual

DCR-IP45/IP45E/IP55/IP55E

2-20.HINGE ASSEMBLY

3 Hinge assembly
1
6 Three screws
(M1.7 × 2.5),
lock ace, p2
FP-523 flexible board (6P)
5
Turn the operation part of
a hinge assembly
in the direction of the arrow.
2 Harness (PB-051)
3 Hinge cover (front)
3 Two screws
(M1.7 × 4),
lock ace, p2
Blind plate assembly
4
7 Two screws
(M1.7 × 4),
lock ace, p2
Caution
(M1.7 ×
This screw
If the screws are removed once, it cannot be re-used.
When re-assembling, use the new MEC screw.
FP-523 flexible board
7
6 Hinge cover (lower)
2 Two claws
VF absorbing sheet
1
2 Two screws
(M1.7 × 4),
lock ace, p2
FP-524 flexible board (6P)
8
2-16
2.5) is MEC-processed.
4 Screw
(M1.7 × 2.5),
0-no.+p2
5 claw
Turn the operation part of
1
a hinge assembly
in the direction of the arrow.