2-3-8.
Hinge Assembly
Procedure
1.
Remove the two screws to detach the VF arm assembly.
Note
When installing the VF arm assembly, fit the two bosses with the two holes.
2.
Remove the three screws to detach the hinge assembly.
Note
When installing the hinge assembly, fit the two bosses with the two holes.
PMW-300
Holes
Bosses
P 2.6 x 4
Holes
Bosses
Hinge assembly
P 2.6 x 4
VF arm assembly
P 2.6 x 4
2-17