Sony Handycam DCR-PC115 Service Manual page 50

DCR-PC115/PC115E/PC120BT/PC120E
Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
To change the still image to
superimpose
Do either of the following:
– Press MEMORY+/– before step 7.
– Press z on the control button before step 7, and
repeat the procedure from step 4.
To change the mode setting
Press z on the control button before step 7, and
repeat the procedure from step 4.
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
•You cannot use MEMORY MIX function for
moving pictures recorded on "Memory Stick"s.
•When the overlapping still image has a large
amount of white, the thumbnail image of the
picture may not be clear.
Image data modified with your computers or
shot with other equipment
You may not be able to play them back with your
camcorder.
When you select M. OVERLAP
You cannot change the still image or the mode
setting.
During recording
You cannot change the mode setting.
To record the superimposed image as a still
image
Press PHOTO deeper in step 7.
174
Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
2
MEMORY
MIX
M. CHROM
100–0021
Still image/
3
To change the still image to
superimpose
Do either of the following:
– Press MEMORY+/– before step 7.
– Press z on the control button before step 7, and
repeat the procedure from step 4.
To change the mode setting
Press z on the control button before step 7, and
repeat the procedure from step 4.
To cancel MEMORY MIX
Press MEMORY MIX.
176
z
z
•
•
4
M. LUMI
100–0021
5
M. LUMI I I I ¥ ¥ ¥ ¥
100–0021
6
M. LUMI I ¥ ¥ ¥ ¥ ¥ ¥
100–0021
z
z
1-40
Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Recording superimposed
images on a "Memory Stick" as
a still image
Before operation
Insert a "Memory Stick" recorded still images
into your camcorder.
(1) Set the POWER switch to MEMORY. Make
sure that the LOCK switch is set to the right
(unlock) position.
(2) Press MEMORY MIX.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– to select the image you
want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY+.
(4) Select the desired mode with the control
button.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press z on the control button.
The still image is superimposed on the
moving image.
(6) Press b/B on the control button to adjust the
effect.
M. CHROM – The colour (blue) scheme of
the area in the still image
which is to be swapped with
a moving image
M. LUMI – The colour (bright) scheme
of the area in the still image
which is to be swapped with
a moving image
C. CHROM – The colour (blue) scheme of
the area in the moving
image which is to be
swapped with a still image
The fewer bars there are on the screen, the
stronger the effect.
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be
recorded on a "Memory Stick." Recording is
complete when the bar scroll indicator
disappears.
Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
Notes
•You cannot use MEMORY MIX function for
moving pictures recorded on "Memory Stick"s.
•When the overlapping still image has a large
amount of white, the thumbnail image of the
picture may not be clear.
Image data modified with your computers or
shot with other equipment
You may not be able to play them back with your
camcorder.
During recording
You cannot change the mode setting.
When recording images on a "Memory Stick"
using the MEMORY MIX function
The PROGRAM AE function does not work. (The
indicator flashes.)
The "Memory Stick" supplied with your
camcorder stores 20 images
– For M. CHROM: 18 images (such as a frame)
100-0001~100-0018
– For C. CHROM: two images (such as a
background) 100-0019~100-0020
Sample images
Sample images stored in the "Memory Stick"
supplied with your camcorder are protected
(p. 210).
(1)
(2)
(3)
(4)
y y
(5) z
(6)
b B
(7)
175
•
•
177