Control Modes; Single Calypso (Music Control) - SHOWTEC Calypso 43104 User Manual

Control Modes

There are 3 control modes:

Single Calypso (music control)

1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
2. Make sure the powercable is unplugged.
3. Make sure that DIP switches 1-9 are all set in "OFF" position.
Address = zero (No DMX control).
4. Set DIP switch F1 in OFF position. DIP switch F2 has no function in stand-alone mode.
F1: OFF = master
F2: Has no function in stand-alone mode.
5. Plug the powercable in a wall socket.
6. Done!
In stand-alone mode the Calypso will chase through its built-in programs, triggered by the built-in
microphone. As there is no music picked up by the built-in microphone, the Calypso will automatically
chase through its built-in programs in slow motion.
• Single Calypso stand-alone (triggered by built-in microphone).
• Multiple Calypso fixtures (Master/Slave mode).
• DMX control.
9