Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Double3 Derby LED Q6 ● IEC Power cable (1,0 m) ●...
Page 4
For replacement use fuses of same type and rating only. ● The user is responsible for correct positioning and operating of the Double3 Derby LED Q6. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
The Double3 Derby LED Q6 can be mounted to any kind of truss with a clamp. Improper installation can cause serious injuries to people and/or damage of property !
Double3 Derby LED Q6 Connection with the mains Connect the device to the mains with the power plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER...
Double3 Derby LED Q6 Description of the device Features The Showtec Double3 Derby LED Q6 is a light effect with high output and is the successor of the classic Derby effect. Music activated colour changer effect Plug & Play ...
07) Built-in microphone Installation Remove all packing materials from the Double3 Derby LED Q6. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
04) If all of the above appears to be O.K., plug the unit in again. 05) If you are unable to determine the cause of the problem, do not open the Double3 Derby LED Q6, as this may damage the unit and the warranty will become void.
The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Product Specifications Model: Showtec Double3 Derby LED Q6 Input Voltage: 100-240V AC, 50/60Hz Power consumption: Protection rate: IP-20 Fuse: 1A/250V Dimensions: 310 mm x 315 mm x 270 mm (LxWxH) (incl.