Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Spectral M850 Q4 IP • Powercon waterproof power cable (1,5 m) •...
Page 4
• If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or safety cable. • When rigging, derigging or servicing the projector, always make sure, that the area below the installation site is secured and that there are not any unauthorized people around. Ordercode: 43621...
UK Cable US Cable BROWN YELLOW/COPPER PHASE BLUE BLACK SILVER NEUTRAL YELLOW/GREEN GREEN GREEN PROTECTIVE GROUND Make sure that the device is always properly connected to the earth! Improper installation can cause serious injuries and/or damage of property! Ordercode: 43621...
After this period complaints will not be handled anymore. Complaints will only then be considered if the client has so far complied with all parts of the agreement, regardless of the agreement from which the obligation is resulting. Ordercode: 43621...
Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Connect the device to the main power supply. Ordercode: 43621...
Color Presets and Manual Mode). This means that you can set your desired operation mode on the master device and all slave devices will react the same as the master device. Multiple Spectrals (Master/Slave control) Fig. 03 Ordercode: 43621...
Do not supply power before the whole system is set up and connected properly. Multiple Spectrals DMX Set Up Fig. 04 Note : Link all cables before connecting electric power Ordercode: 43621...
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m). DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m), • FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m). Ordercode: 43621...
When no button is pressed for 10 seconds, the display will turn off. To light up the display, you have to press the MODE, UP or DOWN button and hold it down for 3 seconds. Once you have pressed the button, the display will light up. Ordercode: 43621...
04) In order to toggle between the 2 modes, press and hold down the UP/DOWN buttons for 3 seconds. It is highly advised to operate the device in Power Saving Mode, in order to extend its lifespan. Ordercode: 43621...
6. Color presets With this menu, you can set the desired color preset. 01) Press the MODE button until the display shows one of the following 38 color presets: 02) Press the UP/DOWN buttons to toggle between the presets. Ordercode: 43621...
With this menu, you can keep track of the operating time in Power Saving Mode. 01) Press the MODE button until the display shows 02) Now you can keep track of the operating time in Power Saving Mode. Ordercode: 43621...
Not functional 14-255 Macro Mode Channel 7 – Strobe Dimmer must be open 0-15 Not functional 16-255 Strobe flash frequency, from slow to fast Channel 8 – Dimming curve Dimmer must be open 0-255 Gradual adjustment dimming curve Ordercode: 43621...
Channel 12 – Strobe Dimmer must be open and CH14 must be set between 0-35 0-15 Not functional 16-255 Strobe flash frequency, from slow to fast Channel 13 – Dimming curve Dimmer must be open 0-255 Gradual adjustment dimming curve Ordercode: 43621...
Suspect two potential problem areas as: the power supply and the LEDs. 01) Power supply. Check that the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Spectral to your Showtec dealer. 03) If both of the above appear to be O.K., plug the unit in again.
Turn up the air conditioning • Disconnect the fixture and return it LEDs damaged to your dealer The power supply settings do not • Disconnect fixture. Check settings match local AC voltage and and correct if necessary frequency Ordercode: 43621...
Spectral M850 Q4 IP Product Specifications Model: Showtec Spectral M850 Q4 IP Input Voltage: 100-240 VAC, 60/50Hz Power consumption: 100W DMX linking: 30pcs Dimensions: 195 x 280 x 300 mm (LxWxH) Weight: 4,7 kg Operating and Programming: Signal pin OUT:...