Installation
6. Verify That the Router Starts Up Properly.
6. Verify That the Router Starts Up Properly.
In this procedure, you will verify that the router module starts up prop-
erly by powering up the hub (which boots the router) and checking that:
The router module completes its self-test successfully.
The Copyright and Main Menu screens appear on the console.
N o t e
If you have not connected a console, you will not be able to verify the
second phase of the router-module startup. (Connecting a console is
necessary except as described on page 1-18.) Instead, an operator at
another device on the network will need to access the router module's
console interface using Telnet and verify that the Copyright and Main
Menu screens appear.
1-20