Appendix B: Troubleshooting Rms Problems - Meyer Sound RMServer Hardware Manual

APPENDIX B: TROUBLESHOOTING RMS PROBLEMS

Verifying your Computer's IPv4 Address
Windows
To verify your computer's IPv4 address in Windows:
1. From the Windows taskbar, click Start and type "cmd" in
the search field, then press Enter.
2. In the Command window, type "ipconfig" and press
Enter. The computer's IPv4 address, subnet mask, and
default gateway are returned.
3. If the computer's IPv4 address range does not match the
RMServer's and you want to change the address for the
computer, do the following:
■ From the Windows taskbar, choose Start > Control
Panel.
■ In the Control Panel window, open the Network and
Sharing Center control panel and then click Local Area
Connection.
■ In the Local Area Connection Status dialog box, click
Properties.
In the Local Area Connection Properties dialog box,
■
select Internet Protocol Version 4 (TCP/IPv4) and click
Properties.
■ In the Internet Protocol Version 4 (TCP/IPv4) Properties
dialog box, select "Use the Following IP Address" and
enter 192.168.0.100 in the IP Address field. Click in the
Subnet Mask field and accept the default values. Click
OK.
57