Table of Contents
Advertisement
12. Reconnect the AC input cable (4-wire, green connector)
from the user panel to the AC mains board. Reconnect
the signal cable from the input board (gray multipin con-
nector) to the user panel. Make sure to fully lock the gray
multipin connector.
13. While carefully aligning the HP/MP RMS module's net-
work connectors and LEDs with the user panel, secure
the user panel to the amplifier with the eight small
screws.
14. Reconnect the green connector from the loudspeaker
cabinet to the top of the amplifier (there are two connec-
tors for the four-channel amplifiers), then carefully slide
the amplifier back in the cabinet and secure it with the
eight large screws.
15. Affix the Neuron ID label to the bottom center of the user
panel, directly below the HP/MP RMS module's LEDs
and network connectors.
Neuron ID label
16. Reconnect the loudspeaker's AC power cable and audio
cable and apply power to the loudspeaker. The Activity
LED blinks to indicate the HP/MP RMS module is opera-
tional and ready to be discovered on the network.
INSTALLING THE MUTE JUMPER ON THE
HP/MP RMS MODULE
To use the mute and solo functions of the HP/MP RMS mod-
ule, the Mute Jumper must be installed on the module.
Meyer Sound currently ships RMS-equipped loudspeakers
with the Mute Jumper installed. These mute-enabled loud-
speakers can be identified by the blue "ME" sticker on the
HP/MP RMS user panel. Older RMS-equipped loudspeak-
ers can be easily mute-enabled by installing the Mute
Jumper, available from Meyer Sound in a mute jumper kit,
P/N 476.005 RMS Mute Enable Replacement Upgrade
Jumper.
ME Sticker
To install the Mute Jumper on the HP/MP RMS module:
1. Remove the loudspeaker's AC power cable and then
wait at least five minutes before removing the HP/MP
RMS module.
2. On the HP/MP RMS module, locate the two (J3) jumper
pins labeled SHORT TO ENABLE MUTE and install the
blue Mute Jumper on these two pins.
RMS Mute Jumper
HP/MP RMS Module Jumper Pins
RMS USER GUIDE
Install here
33
Hide quick links:
Advertisement
Table of Contents
