Meyer Sound RMServer Hardware Manual page 15

NOTE: Changes to settings in this section that are
marked with a double asterisk (**) take effect after
RMServer has been restarted.
Host Information and Network Information**:
Device Name: The name that will appear for RMServer in the
Network page of the RMS tab of Compass.
[RMServer #n]
Configure: Choose Manually or Using DHCP from the drop-
down menu. Designates whether the IPv4 address of
RMServer is specified or assigned using DHCP.
Current IP address: The IPv4 address currently assigned to
the RMServer unit.
[192.168.0.120 (Static)]
Static IP Address: The IP v4 address used when Configure is
set to Manually.
[192.168.0.120]
Subnet Mask: The IPv4 subnet address.
[255.255.255.0]
Gateway: The IPv4 address of a router in the network.
[192.168.0.1]
Search Domain: A search domain is a kind of shortcut DNS
filtering method to simplify reaching sites you visit often.
Once specified by the user, a search domain is automatically
appended to typed text in the URL address bar of a browser.
Enter the desired search domain in this field.
Primary DNS: DNS settings are used only when the mail
server specified for email alerts uses IPv4 protocol, and the
user wishes to address it by name, instead of by its IPv4
address. In other circumstances, DNS settings are not
needed.
[192.168.50.11]
Secondary DNS: Part of the DNS settings required to
address a mail server using IPv4 protocol by name.
[192.168.50.12]
Security
Username: Displays the current user name.
Edit button: Opens Security Settings dialog for editing the
user name or password.
Security Settings dialog:
Figure 9: The user name and password are edited in the Security
Settings dialog.
Username: Enter the user name you want. Any ASCII char-
acters can be used. User names are case sensitive.
Password: Enter the password you want. Any ASCII charac-
ters can be used. Only the first eight characters of a pass-
word are used for verification. Passwords are case sensitive.
Reenter Password: Reenter the password you want.
Click the Save button in the lower right to save the settings.
The Cancel button in the lower left exits the dialog without
saving changes. A close box for the dialog is in the upper
left corner.
Date and Time Settings
This section displays current date, time, and time zone set-
tings. To change these settings, click the Edit button to open
the Date and Time Settings dialog.
Date: Displays the date on the server clock, which can be
set by the user to a convenient date and time, usually the
current date and time. The server clock is used by RMServer
when making log entries and timestamping email alerts.
[Date of manufacture]
Time: Displays the current time in hours and minutes, using
a 24-hour format (00:00 to 23:59). This field is set on page
load. Refresh the page to update this field to the current
time.
Time Zone: Displays the current time zone setting.
[America/US/Pacific Time]
Edit button: Opens the Date and Time Settings dialog,
where the date, time, and time zone settings can be edited.
RMS USER GUIDE
15