Meyer Sound RMServer Hardware Manual page 14

CHAPTER 2: INSTALLING AND CONFIGURING RMSERVER
Figure 7: The Dashboard in RMServer's web server displays essential
setup parameters for RMServer.
Host and Network Information:
Device Name: The name assigned by the user to the
RMServer unit.
[RMServer #n]
IP Address: IPv4 address of RMServer.
[192.168.0.120 (Static)]
Security
Username: The user account name. Default is
Date and Time Settings
Server Date Time: The server date and time are used in
RMServer's logging and for timestamping email alerts, and
are usually set to the current date and time.
Email Notification
Displays email alerts that have been enabled by the user.
[Not Configured]
14
Relay Configuration
Displays the fault conditions that trigger RMServer to
change the state of the indicated relay output.
[Relay 1: Set to trigger on (Speaker Offline) (Load
Fault)]
[Relay 2: Set to trigger on (Speaker Offline) (Load
Fault)]
Firmware
Displays the firmware version currently running in RMServer.
Basic Settings
admin .
Figure 8: The Basic Settings page of RMServer's web server.