Meyer Sound RMServer Hardware Manual page 56

APPENDIX A: COMPARISON OF RMS MODULES
Table 3: RMS Module
RMS Module LEDs
MPS-488HP Wink/Activity LED (Green):
(HMS-5, HMS-10, HMS- ■ Blinks 10 ten times when powering up
12, MM-4XP, MM-4XPD,
the loudspeaker.
MM-XPV, MM-10XP,
■ Unlit, after powering up, if the loud-
UP-4XP, UPM-1XP, UPJ-
speaker is not discovered.
1XP, UPJunior-XP, UMS-
■ Flashes continuously when the loud-
1XP)
speaker is discovered, and flashes
more rapidly with increased data activ-
ity.
56
Buttons
Identify Button:
■ Press to identify the MPS-488HP on
the RMS network during the discovery
process.
■ Press to wink the discovered
MPS-488HP.
■ Press and hold when powering up the
MPS-488HP to undiscover it.
RMS Network Mute
Connectors Enable
2 Weidmuller None
connectors (Always
Enabled)