Note
•
We recommend setting the "TEL Line Level
Reduction" setting to "On" when establishing
conference calls that use the TEL line (see
page 54).
Adding a PS or PC line call to an IP call
1.
Confirm that the "Line Selection" setting is set
to "IP + PS" or "IP + PC" as necessary (see
page 33).
2.
Press
to put the current call on hold.
CONF
3.
Press the left function button ([F1]) to select the PS
or PC line.
Example: Pressing
PS
The IP line is selected.
[F1]
4.
Make a call using the PS or computer.
5.
After the called party answers, press
begin the conference call.
•
Before beginning the conference call, press
to end the second call and return to the
END
original call.
Note
•
When the operation mode is set to "USB
Audio", conference calls cannot be made.
Ending a Conference Call
Press [
] to disconnect both parties.
or
1.
Press
.
END
•
Press
to continue the call.
BACK
2.
Press [ ] or [ ] to select the party you would like
to remove from the conference, then press
•
The selected party is disconnected and you can
continue to speak with the remaining party.
•
To disconnect both parties, select "All", then
press
.
SELECT
Document Version
2011/06
to select the PS line.
The PS line is selected.
to
CONF
SELECT
.
Making and Answering Calls
Operating Instructions
37