Panasonic KX-NT700 Operating Instructions Manual page 5

Ip conference phone
Hide thumbs Also See for KX-NT700:
Table of Contents

Advertisement

G.722 speech codec support
full-duplex communication
speech speed conversion (see page 39)
mic noise reduction (see page 39)
External Wired MIC connection (see page 32)
SD Memory Card Recording
Phone calls and voice memos can be recorded to, and played back from, a compatible SD memory card (see
page 42).
PoE (Power over Ethernet) Ready
The unit is compliant with PoE (IEEE 802.3af) standards, and contains a power receiving device that enables
it to receive power from the same Ethernet cable used for IP network connection. This allows you to use the
unit in locations where there is no AC outlet nearby, saving you the cost of installing a new AC outlet. PoE
connection requires a PoE-compliant hub or similar device. The included AC adaptor can be used instead of
a PoE connection if you want to connect the unit to a standard AC outlet.
Conferencing Phone Manager Software Features
The unit can be used in conjunction with Conferencing Phone Manager. This software can be found on the
included CD-ROM, and allows you to operate and program the unit using a computer (see the Operating
Instructions for Conferencing Phone Manager for more details).
Video Conference/Sharing application
By using Conferencing Phone Manager, you can create a video conference and share applications with the
other party.
Video Conference Sharing application
Document Version
2011/06
IP Network
(Intranet)
Introduction
LAN
USB
Operating Instructions
5

Advertisement

Table of Contents
loading

Table of Contents