Panasonic KX-NT700 Operating Instructions Manual page 73

Message
Reject Call
Not Found
Phonebook
No Items Stored
Phonebook Error
Call Log Error
Please Wait
Format Error
Unable To Use
Memory Full
Write Protected
System Data Err
Clear Data?
Document Version 2011/06
Possible Cause & Solution
•
The called party rejected your call (displayed for IP calls only).
→
Try again later.
•
The called party cannot be connected (displayed for IP calls
only).
→
Confirm that you have entered the IP address, SIP
extension, or SIP URI of the other party correctly.
→
Try again later.
•
The phonebook contains no entries.
→
You must store entries in the phonebook before you can
make a call from the phonebook.
•
An error has occurred.
→
Press [BACK], then erase all phonebook entries using the
"Erase All Phonebook Data" feature.
•
An error has occurred.
→
Press [BACK], then erase the redial list using the "Erase
All Call Log Data" feature.
•
An SD memory card was inserted.
→
Wait while the unit checks the card.
•
An error occurred while formatting the SD memory card.
→
Remove the SD memory card and use a different card.
•
The SD memory card is not compatible with the unit.
→
Make sure that you are using a compatible SD memory
card.
→
SDHC, miniSDHC, and microSDHC memory cards are not
compatible with the unit.
•
The SD memory card is not formatted in FAT format.
→
Use a FAT format SD memory card.
•
The selected recording is less than 1 second long.
→
Recordings less than 1 second long cannot be played
back.
•
The SD memory card cannot be used for recording because
it is full.
→
Erase unneeded recordings.
•
The switch on the side of the SD memory card is in the
"LOCK" position.
→
Remove the card, slide the switch to unlock the card, then
insert the card again.
•
An error has occurred.
→
Press to reset all system data and restart the unit.
YES
Press to restart the unit without resetting any data.
NO
Troubleshooting
Reference
—
—
page 40
page 65
page 65
—
—
page 30
page 31
—
page 43
page 30
—
Operating Instructions 73