Panasonic KX-NT700 Operating Instructions Manual page 57

SIP Proxy Server Port Number
Description
Set this parameter to match the SIP port number of the
IP-PBX or SIP proxy server.
The communication protocol used is UDP.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
SIP Registrar IP Address
Description
Set this parameter to match the IP address of the IP-PBX.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
SIP Registrar Port Number
Description
Set this parameter to match the SIP port number of the
IP-PBX or SIP registrar server.
The communication protocol used is UDP.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Hold Method
Description
Determines the hold protocol used for the IP line.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Document Version 2011/06
Available Settings
1024–50999
Available Settings
—
Available Settings
1024–50999
Available Settings
RFC2543
RFC3264
Operating Instructions
Programming the Unit
Default Setting
5060
Default Setting
0.0.0.0
Default Setting
5060
Default Setting
RFC3264
57