Operation Mode
By selecting an operation mode, the unit can be
operated as a SIP extension of the PBX, a peer to peer
IP conferencing phone, or a computer's USB audio
device. The available line selection for each operation
mode is as follows:
Operation Mode
Available Line Selection
IP-PBX
Peer to Peer
USB Audio
1.
Press [MENU].
2.
Select "Operation Mode", then press
3.
Select the desired setting.
•
"IP-PBX": The unit can make and receive IP
calls as a SIP extension of the PBX. To make a
call, the other party's SIP extension number or
SIP URI is specified. (This is the default setting.)
•
"Peer to Peer": Peer to peer IP calls are
possible. To make a call, the other party's IP
address is specified.
•
"USB Audio": The unit operates as the USB
audio device of a computer (see page 45).
4.
Press
.
SAVE
5.
Press [MENU].
Note
•
If this setting is changed, the unit must be
restarted before the new setting becomes
effective (see page 47).
•
When the operation mode is set to "USB
Audio", IP, TEL, PS or PC calls cannot be
made or received.
Document Version
2011/06
IP + TEL
IP + PS
IP + PC
IP + TEL
IP + PS
IP + PC
–
.
SELECT
Preparation
Operating Instructions
29