Protocol Settings - Panasonic KX-NT700 Operating Instructions Manual

IP Address
Description
Determines the unit's IP address.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Subnet Mask
Description
Set this parameter to match the IP address of the IP
network's subnet mask.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Default Gateway
Description
Set this parameter to match the IP address of the IP
network's default gateway.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).

Protocol Settings

Consult your system administrator for the appropriate settings.
SIP Ext. No.
Description
Set this parameter to match the extension number
assigned to the unit through PBX programming.
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Document Version 2011/06
Available Settings
—
Available Settings
—
Available Settings
—
Available Settings
Max. 32 characters
Operating Instructions
Programming the Unit
Default Setting
192.168.0.2
Default Setting
255.255.255.0
Default Setting
0.0.0.0
Default Setting
—
55