Ending A Conference Call; Locking Operations (Application Lock) - Panasonic KX-NT400 Operating Instructions Manual

Basic Feature Operation
To return to a conference
1.
On the HOME screen, press Feature.
2.
On the Feature Key screen, press the flashing
green flexible key.
Usage tips
• Both parties will hear an alarm tone before a
specified time-out. The originating extension user
will hear an alarm tone before time out. The call is
disconnected when the timer runs out unless the
originating extension returns to the conference.
To leave a conference and not be able to
return
1.
Go on-hook.
Note
• To leave a conference call involving two
outside parties and have the conversation
continue, your extension must be enabled to
transfer calls to outside lines through COS
programming.

Ending a Conference Call

Ending a Conference Call
You can end a conference that you have established.
All parties will be disconnected.
1.
During a conference, on the Calls screen, press
End the conference.
40 Operating instructions

Locking Operations (Application Lock)

Locking Operations
(Application Lock)
The Application Lock feature lets you restrict operation
to only a few operation screens. When you set the
Application Lock, you can still access some screens,
such as the HOME and Calls screens.
If you try to access a screen that is locked, you will be
prompted for a password to turn off Application Lock.
In order to use the Application Lock, you must enable
the Application Lock feature. For details, see
"Password Settings (Page 101)".
To set the Application Lock
1.
On the HOME screen, press
To cancel the Application Lock
1.
On the HOME screen, press
2.
On the Unlock Application window, enter the
Application Lock password.
–or–
1.
Access a screen that is locked.
2.
On the Unlock Application window, enter the
Application Lock password.
Note
• If you enter a wrong password a pre-
programmed number of times, the password
will become locked. When this happens, the
password will have to be unlocked in the
connected PBX.
.
.