Unit Overview; Main View - Panasonic KX-NT700 Operating Instructions Manual

Before Use

Unit Overview

Main View

D
C B
C B
E
A Speaker
B Indicators (4 locations)
Indicate the status of the unit.
Off: The unit is in standby mode (i.e., not in use).
Blue, flashing: A call is being received.
Blue, lit: The unit is on a call.
Red, lit: The microphones are muted, or an error
has occurred.
C Built-in Microphones (4 locations)
See page 32.
D USB Port (USB)
Used to connect the unit to a computer and use
the included Conferencing Phone Manager
software. Also used to connect the unit to a
computer to use the microphones and speaker of
the unit for your IP phone software (see
page 45).
E SD Memory Card Slot
Allows you to insert a compatible SD memory
card and record conversations. See page 30 for
more information about SD memory cards.
F AUDIO IN/OUT Jack
Allows you to connect a compatible Panasonic
Portable Station (PS; see page 44) or a
computer (see page 46).
20 Operating Instructions
A
B
C
B
C
F
G External Wired MIC Jacks (EXT MIC1, EXT
MIC2)
Allow you to connect an External Wired MIC to the
unit (see page 32). 2 mics can be connected.
H DC Input (DC IN)
Used to connect the unit to an AC outlet using the
included AC adaptor.
I LAN Port (LAN)
Used to connect the unit to an IP network. May
also be used to supply power to the unit using PoE
(Power over Ethernet) when the unit is connected
to a PoE-compatible switching hub or power
supply (see page 25).
J Telephone Jack (LINE)
Used to connect the unit to a telephone network
or PBX.
G
H
I
J
Document Version 2011/06