Conference Call (Local Three-Way Conference); Making A Conference Call; Removing A Party From The Conference; Ending A Conference Call - Panasonic KX-UT113 Operating Instructions Manual

Conference Call (Local
Three-way Conference)
During a conversation, you can add an additional party
to your call and establish a conference call.
Notice
•
Your phone system may support advanced
conference features, such as conference calls
with four or more parties. In this case, the
procedures for handling a conference call may
be different from those explained in this section.
For details about your phone system, consult
your administrator or dealer.

Making a Conference Call

1.
Press [CONFERENCE] to put the current call on
hold.
2.
Call the party you want to add to the conversation.
3.
After the called party answers, press
[CONFERENCE] to begin the conference call.
Removing a Party from the
Conference
During a conference, you can remove other parties from
the conference. However, this operation is available
only during conference calls you initiate.
For KX-UT113/KX-UT123 users
1.
During a conference call, press [HOLD].
•
The second party is put on hold, but you can
continue talking to the first party.
2.
Go on-hook.
•
The first party is disconnected.
3.
Press [HOLD].
•
You can continue the conversation with the
second party.
Note
•
To disconnect the second party instead of the
first party, press [HOLD] 2 times in step 1.
•
Once you have pressed [HOLD], the
conference cannot be reestablished.
For KX-UT133/KX-UT136 users
1.
During a conference call, press [HOLD].
•
The other parties are put on hold.
Document Version 2011-06
2.
Press the DN button (flexible button) that
corresponds to the party you want to disconnect.
•
A conversation is established with the party you
want to disconnect.
3.
Go on-hook.
•
The party is disconnected.
4.
Press the DN button (flexible button) that
corresponds to the remaining party.
•
You can continue the conversation with the
remaining party.
Note
•
Once you have pressed [HOLD], the
conference cannot be reestablished.
•
For details about DN buttons, see "Flexible
Buttons (KX-UT133/KX-UT136 only)
(Page 34)".

Ending a Conference Call

1.
Go on-hook during a conference.
Feature Operations
Operating Instructions 31