Panasonic KX-NT136 Quick Reference Manual

Ip proprietary telephone
Hide thumbs Also See for KX-NT136:

Advertisement

Important Information
When using the KX-NT136, keep the following conditions in mind.
If the unit does not operate properly, disconnect the unit from the Ethernet® cable and
then connect again.
If you are having problems making calls, unplug the Ethernet cable and connect a known
working IP Proprietary Telephone (IP-PT). If the known working IP-PT operates properly,
have the defective IP-PT repaired by an authorised Panasonic Factory Service Centre.
If the known working IP-PT does not operate properly, check the Hybrid IP-PBX and the
Ethernet cable.
Wipe the unit with a soft cloth. Do not clean the unit with abrasive powders or with
chemical agents such as benzene or thinner.
Use only the correct Panasonic handset.
Do not disassemble this unit. Dangerous electrical shock could result. The unit must
only be disassembled and repaired by qualified service technicians.
If damage to the unit exposes any internal parts, immediately disconnect the cable or cord.
If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect
the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a
service centre.
Never attempt to insert wires, pins, etc. into the vents or other holes of this unit.
This unit is designed to aid the visually handicapped to locate dial keys and buttons.
This unit is designed to be installed under controlled conditions of ambient temperature
and a relative humidity.
Avoid installing the unit in damp or humid environments, such as bathrooms or swimming
pools.
999 and 112 can be dialled on the product after accessing the CO line for the purpose of making
outgoing calls to the BT emergency (999) and (112) services (United Kingdom only).
WARNING:
TO PREVENT POSSIBLE FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.
IMPORTANT NOTICE:
• Under power failure conditions, the IP-PT may not operate. Please ensure that a
separate telephone, not dependent on local power, is available for use in an emergency.
• For information regarding network setup of the IP-PT such as IP address, please
refer to the Installation Manual for the Panasonic Hybrid IP-PBX.
• If an error message is shown on your display consult the network administrator.
• The firmware of the KX-NT136 is protected by copyright laws and international treaty
provisions, and all other applicable laws. It can not be reverse engineered, decompiled
or disassembled.

Quick Reference Guide

IP Proprietary Telephone
KX-NT136
Model No.

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-NT136

  • Page 1: Quick Reference Guide

    • If an error message is shown on your display consult the network administrator. • The firmware of the KX-NT136 is protected by copyright laws and international treaty provisions, and all other applicable laws. It can not be reverse engineered, decompiled...
  • Page 2 Ethernet is either a registered trademark or a trademark of Xerox Corporation in the United States and/or other countries. This product is intended to be connected to a Panasonic Hybrid IP-PBX only. Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio &...
  • Page 3: Features List

    Features List Talk Outside (CO) Line button Off-hook On-hook Feature number (CO) Incoming Call Distribution Group button Direct Station Selection button (ICD Group) (DSS) Confirmation Tone Ringback Tone C. Tone R.B. Tone Feature Operation Making Calls To an extension To an outside party outside Calling extension no.
  • Page 4: Call Park

    Features List Feature Operation Useful Features To set/cancel During a conversation using the handset Off-hook Monitor SP-PHONE During a conversation To set parking zone no. Specified (2 digits) TRANSFER C. Tone C. Tone Auto Call Park To retrieve stored parking zone no.
  • Page 5: Using The Display Proprietary Telephone

    Using the Display Proprietary Telephone Using the Call Log or Directories You can make a call with the call log or directories as follows: Outgoing Call Log Incoming Call Log Extension Number Directory System Speed Dialling Directory Personal Speed Dialling Directory Calling with a call log or directory While on-hook Press Left or Right...
  • Page 6: Accessing The System Features

    Using the Display Proprietary Telephone Storing names and numbers for the Personal Speed Dialling Directory While on-hook AUTO DIAL AUTO DIAL CANCEL STORE STORE name phone no. PAUSE Enter phone Enter name number (max. 20 Press STORE Press STORE Press CANCEL (max.
  • Page 7: Settings On The Programming Mode

    Settings on the Programming Mode Setting Features You can customise many features of your telephone as shown in the following tables. Original settings are shown in the gray boxes. For later reference, place a check mark in the boxes below to indicate your customised settings. To enter the To programme To exit...
  • Page 8 Settings on the Programming Mode Programming Item Selection & Parameter Input No–Off [Absent Msg Off] Would you like to show a message on the message no. (1-8) Yes–Shows the selected message. caller's telephone [Absent Msg] display? (Absent Message) Yes–Shows your personal message. [Fwd/DND Off] FWD/DND Do Not Disturb (DND)
  • Page 9: Location Of Controls

    Location of Controls Soft Buttons LCD (Liquid Crystal Display) Message/Ringer KX-NT136 Lamp PAUSE FWD/DND (Call Forwarding/ Do Not Disturb) CONFERENCE CONF FWD/DND PAUSE INTERCOM INTERCOM AUTO ANS AUTO DIAL MUTE STORE AUTO ANS/ MUTE AUTO DIAL/ STORE Flexible CO Buttons...
  • Page 10: Entering Characters

    Using the Display Proprietary Telephone Entering Characters You can enter alphabetic characters and digits using the dialling buttons. Pressing a dialling button repeatedly displays different characters, as shown in the following tables. Table 1 (Standard mode) Times Buttons While entering characters, you "...
  • Page 11 United Kingdom: KX-A237E (PQLV1E)/Greece: KX-A237CE (PQLV1CE) Note: • Consult your dealer for more details about the AC adaptor. • For further information on the connection of the KX-NT136 to a PC, refer to the information regarding the KX-NT136 in the documentation of the Hybrid IP-PBX.
  • Page 12: Tilt Angle Adjustment

    To temporarily place the handset down during a conversation, hook it over the top edge of the telephone as shown. 83 mm © 2004 Panasonic Communications Co., Ltd. All Rights Reserved. PSQX3298ZA KK0904PY0 (E/GR)

Table of Contents