Wireless Lan Test Program (Intel-Made A/B/G) - Toshiba Satellite R10 Maintenance Manual

3 Tests and Diagnostics

3.27 Wireless LAN Test Program (Intel-made a/b/g)

This section describes how to perform the wireless LAN transmitting-receiving test (Intel-
made Calexico 802.11a/b/g). To execute the wireless LAN test, use the Diagnostics disk for
wireless LAN test. Finish the tests of the Main test program by selecting 99 - EXIT TO
DIAGNOSTICS MENU in the DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS
MENU, select 9 - EXIT TO MS-DOS.
Insert the Diagnostics disk for wireless LAN test into the Floppy Disk Drive. Turn on the
power while pressing U.
The following menu appears in the display.
***********************************************************
* Intel Calexico2 11a/g Maintenance T&D Menu
*
* 1 : SKU check of Module
*
* 2 : MAC Address Check
*
* 3 : Antenna Check & communication test of 11b mode
*
* 4 : Communication test of 11a mode
*
* 5 : Communication test of 11g mode
*
* 6 : All the tests of Calexico2 11a/g Card
* (SKU & MAC Check, 11a/b/g communication test)
*
***********************************************************
SELECT TEST No, (1-6) :
To execute the subtest, input the subtest number and press Enter.
Subtest01 SKU check of module
This subtest displays SKU information on the wireless LAN card installed.
Selecting this subtest, following message will appear in the display. Confirm
if the right information on the wireless LAN card is described.
*************************************************************
*
*
*
*
*
*************************************************************
Press any key and return to the test menu.
Satellite R10 Maintenance Manual (960-509)

3.27 Wireless LAN Test Program (Intel-made a/b/g)

Module : Intel Calexico 802.11a/g (MoW)
G-code : G36C00018510
PBA No. : C67287
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
3-63