4 Replacement Procedures
4.17 Mic (L) cable guide
Removing the mic (L) cable guide
The following describes the procedure for removing the mic (L) cable guide. (See Figure
4-27.)
1. Disconnect the mic (L) cable from the connector CN6060 on the system board
and pull it out from the mic (L) cable guide.
2. Remove the following screws and mic (L) cable guide.
M2.0x6.0B
Installing the mic (L) cable guide
The following describes the procedure for installing mic (L) cable guide (See Figure 4-
27).
1. Install the mic (L) cable guide to the system board and secure it with the
following screws.
M2.0x6.0B
2. Connecting the mic (L) cable to the connector CN6060 on the system board,
arrange the cable along the mic (L) cable guide.
Satellite R10 Maintenance Manual (960-509)
FLAT BIND screw
Figure 4-27 Removing the mic (L) cable guide
FLAT BIND screw
4.17 Mic (L) cable guide
x2
x2
4-41