Toshiba Satellite R10 Maintenance Manual page 279

4 Replacement Procedures
5. Turn up the insulator and disconnect the HV cable from the connector of FL
inverter.
6. Remove the following screws securing the LCD unit.
M2.0x4.0B
7. With the bottom edge of the LCD unit on the display cover, raise the top edge of
the LCD unit.
NOTE: When putting the LCD unit on the display cover, lay a mat or something under
the LCD unit to protect the computer and the LCD from a scratch or
breakage.
8. Peeling off the glass tapes (2 tapes), disconnect the LCD harness and digitizer
harness from the connectors on the back of LCD unit.
9. Remove the LCD unit from the display cover.
Insulator
HV cable
Satellite R10 Maintenance Manual (960-509)
FLAT BIND screw
M2.0x4.0 FLAT BIND
Figure 4-38 Removing the LCD unit
4.25 LCD unit & FL inverter
x4
M2.0x4.0 FLAT BIND
Glass tape
M2.0x4.0 FLAT BIND
4-53