4 Replacement Procedures
4.18.2 CN board
Removing the CN board
The following describes the procedure for removing the CN board. (See Figure 4-29.)
1. Remove the following screws securing the CN board.
M2.0x6.0B
2. Pull up to remove the CN board from the cover assembly.
M2.0x6.0B FLAT BIND
Installing the CN board
The following describes the procedure for installing the CN board. (See Figure 4-29.)
1. Install the CN board to the cover assembly and secure it with the following
screws.
M2.0x6.0B
Satellite R10 Maintenance Manual (960-509)
FLAT BIND screw
Figure 4-29 Removing the CN board
FLAT BIND screw
4.18 QI board / CN board
x2
CN board
x2
4-43