Hinge Switch Board - Toshiba Satellite R10 Maintenance Manual

4.30 Hinge Switch Board

4.30 Hinge Switch Board
Removing the hinge switch board
The following describes the procedure for removing the hinge switch board. (See Figure
4-46.)
1. Remove the following screws and hinge switch board.
M2.0x3.0B
2. Remove the plate placed under the hinge switch board.
M2.0x3.0B
FLAT BIND
Hinge switch board
Installing the hinge switch board
The following describes the procedure for installing hinge switch board. (See Figure 4-
46.)
1. Install the plate fitting to the bosses on the hinge assembly.
2. Install the hinge switch board and secure it with the following screws.
M2.0x3.0B
4-68
FLAT BIND screw
Figure 4-46 Removing the hinge switch board
FLAT BIND screw
4 Replacement Procedures
x2
x2
Satellite R10 Maintenance Manual (960-509)