Lens Holder - Toshiba Satellite R10 Maintenance Manual

4.23 Lens holder

4.23 Lens holder
Removing the lens holder
The following describes the procedure for removing the lens holder. (See Figure 4-35.)
1. Remove the following screw securing the lens holder.
M2.5x4.0B
Remove the lens holder from the cover assembly.
Lens holder
Installing the lens holder
The following describes the procedure for installing the lens holder. (See Figure 4-35.)
1. Install the lens holder to the cover assembly.
2. Secure the lens holder with the following screw.
M2.5x4.0B
4-50
S-THIN FLAT BIND screw
Figure 4-35 Removing the lens holder
S-THIN FLAT BIND screw
4 Replacement Procedures
x1
M2.5x4.0B S-THIN FLAT BIND
x1
Satellite R10 Maintenance Manual (960-509)