Speaker - Toshiba Satellite R10 Maintenance Manual

4 Replacement Procedures

4.21 Speaker

Removing the speaker
The following describes the procedure for removing the speaker. (See Figure 4-32.)
1. Turn up the insulator.
2. Pull out the speaker cable from the guide insulator of cover assembly.
3. Pull out the speaker from the slot of cover assembly.
Speaker cable
Speaker (L)
<Red & Black cable>
Installing the speaker
The following describes the procedure for installing the speaker. (See Figure 4-32.)
1. Install the speaker to the slot of cover assembly.
NOTE: When installing the speaker, confirm the right installation of right and left
speaker. (Right = Red and Green cable, Left = White and Green cable).
2. Arrange the speaker cable along the guide insulator.
3. Stick the insulator over the guide of speaker cable.
Satellite R10 Maintenance Manual (960-509)
Guide insulator
Figure 4-32 Removing the speaker
4.21 Speaker
Speaker (R)
<White & Green cable>
Insulator
Guide insulator
4-47