Page 1 Satellite Series User’s Guide If you need assistance: Toshiba’s Support Website ❖ pcsupport.toshiba.com Toshiba Global Support Centre ❖ Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 196 in this guide.
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Website at pcsupport.toshiba.com ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à...
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13 The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Device Authorization
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. The Name of the radio equipment: refer to the equipment label provided on the computer JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS...
Page 15 802.11b (2.4 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 E’necessaria la concessione ministeriale anche per l’uso interno. Verificare con i rivenditori la procedura da seguire. Nederland: License required for outdoor installations. Check with reseller for procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure. 802.11a (5 GHz) Australia Canada...
Page 17 ❖ To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.
Page 18 802.11b (2.4 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19: Bluetooth Wireless Technology Interoperability
New Zealand Portugal Sweden Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖...
Page 20: Bluetooth Wireless Technology And Your Health
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the United States for...
Page 21: Regulatory Statements
community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement.
Page 24 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazard, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 25 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 26 TouchPad is a trademark of Synaptics, Inc. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 27 Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org.
Page 28: Table Of Contents
Keeping yourself comfortable ...43 Precautions...43 Important information on your computer’s Setting up your computer ...46 Setting up your software...47 Registering your computer with Toshiba ...48 Adding external devices ...48 Connecting to a power source ...49 Charging the main battery...52 cooling fan ...46...
Page 29 Using the computer for the first time ...52 Opening the display panel ...52 Your computer’s features and specifications ...54 Turning on the power...54 Using the TouchPad...55 Adding memory ...58 Installing a memory module ...58 Removing a memory module...64 Connecting an external USB keyboard ...65 Connecting an external USB mouse ...65 Connecting a printer ...66 Setting up a printer ...67...
Page 30 Restart command ...98 Hibernation command ...98 Stand By command...99 Using Turn Off or Shut down ...100 Using Hibernation mode ...103 Using Standby mode...106 Toshiba’s online resources ...109 Chapter 3: Mobile Computing ...110 Toshiba’s energy-saver design...110 Running the computer on battery power ...110...
Page 31 Battery Notice ...111 Power management ...112 Using additional batteries ...112 Charging batteries...113 Charging the main battery...113 Charging the RTC battery...114 Monitoring main battery power...115 Determining remaining battery power...117 What to do when the main battery runs low ...118 Setting battery alarms...119 Conserving battery power ...119 Power Profiles ...120 Using a hot key to set the Power Profile ...121...
Page 32 Using external speakers or headphones...146 Recording sounds...147 Using a microphone...147 Using tablet mode...148 Preparing to use the tablet ...148 Using the Toshiba tablet pen...150 Returning the computer to its original Using the i.LINK port ...152 Using PC Cards...153 Inserting a PC Card ...153 Removing a PC Card ...154...
Page 33 Power Management ...169 Hotkey utility ...171 TOSHIBA Hardware Setup...171 TOSHIBA Mobile Extension...173 TOSHIBA Accessibility ...175 TOSHIBA CD/DVD Drive Acoustic Silencer ...176 TOSHIBA Button Controls Utility ...177 TOSHIBA Rotation Utility ...177 Cross Menu Utility ...180 TOSHIBA Tablet Access Code Utility ...182 TOSHIBA Zooming Utility...183...
Page 34 Contents Chapter 6: Keeping Your Files Safe... 186 Using passwords in the Windows operating system ...186 User-level passwords ...187 Setting a user-level password ...188 Disabling the user-level password ...188 Using the power-on (user-level) password ...189 Using the instant (user-level) password...189 Using the HDD password...189 Setting a hard disk drive user only Deleting or changing a hard disk drive...
Page 35 Develop good computing habits ...229 Data and system configuration backup in If you need further assistance...236 Before you contact Toshiba ...236 Contacting Toshiba ...237 Other Toshiba Internet Web sites ...238 Toshiba’s worldwide offices...238 Appendix A: Hot Keys... 240 Volume Mute ...240 Password security ...241 Without a password ...241...
Page 36 Contents Appendix B: Power Cord/Cable Connectors ... 249 USA and Canada ...249 United Kingdom ...249 Australia...249 Europe ...249 Appendix C: Using ConfigFree with your Toshiba Computer ... 250 Getting Started...251 Starting ConfigFree ...251 ConfigFree Utilities...253 Connectivity Doctor ...253 Search for Wireless Devices ...256 Profile Settings ...261...
Page 37: Introduction
Introduction Welcome to the world of powerful, portable multimedia computing. With your new Toshiba notebook computer, your work and entertainment can accompany you wherever you You will find your operating system, Microsoft XP Tablet PC Edition, already installed on your computer.
Page 38: This Guide
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 39: Safety Icons
Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Page 40: Other Icons Used
Other documentation Your computer comes with the following documentation: An electronic version of the user’s guide ❖ It may also contain guides for other programs that may ❖ come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com.
Page 41: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 196.
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 43: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. Liquids and corrosive chemicals. ❖ Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 44 Getting Started Selecting a place to work Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 45 Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Before you remove a PC Card, always wait for it to cool. You could get burned removing a hot PC Card. Never place a heavy object on the computer and be careful not to drop a heavy object onto the computer.
Page 46: Important Information On Your Computer's Cooling Fan
Getting Started Setting up your computer Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer. To prevent possible overheating of the CPU, make sure the air intake on the cooling fan is not blocked.
Page 47: Setting Up Your Software
To register your computer online or to sign up for an Internet account, you must either connect the built-in modem to a telephone line or establish a Local Area Network (LAN) connection. See on page 138. Setting up your software NOTE The names of windows displayed, and the order in which windows appear, may vary according to your software setup...
Page 48: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba web site at www.register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 49: Connecting To A Power Source
As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to your computer, possibly resulting in serious injury.
Page 50 Getting Started Connecting to a power source Power cord/cable Sample power cord/cable and AC adapter To connect AC power to the computer: Connect the power cord/cable to the AC adapter. Sample connecting the power cord/cable to the AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Page 51 Sample connecting the AC adapter to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows green. Never tamper with the cord/cable or plug; never splice or alter a cord/cable; never bend or twist a cord/cable; never place heavy objects on a cord/cable;...
Page 52: Charging The Main Battery
Getting Started Charging the main battery Is unlit when the main battery has discharged, the battery ❖ is not charging, or the AC adapter is not plugged into the computer or AC outlet Flashes amber when the main battery charge is low and it ❖...
Page 53 Sample opening the display panel To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel. To learn how to rotate the display panel or use your computer in tablet mode.
Page 54: Your Computer's Features And Specifications
Getting Started Using the computer for the first time Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 55: Using The Touchpad
on the system indicator panel glows green—about one second. Never turn off the computer while any of the drives are in use. Doing so may damage the media in use and result in loss of data. The preinstalled operating system loads automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely.
Page 56 Getting Started Using the computer for the first time To move it to the left side, slide your finger from right to ❖ left. Because the TouchPad is much smaller than the display NOTE screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the desired direction.
Page 57 Using the computer for the first time Click Printers and Other Hardware. Click Mouse Properties. The Mouse Properties window appears. Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab appears. Sample Mouse Properties window, TouchPAD ON/OFF tab Select Disable or Enable, whichever is appropriate. Click Apply.
Page 58: Adding Memory
For more information on memory options, check the accessories information that came with your computer, or visit accessories.toshiba.com. Before adding external devices or memory, Toshiba NOTE recommends setting up your software. See software” on page Installing a memory module An additional memory module can be installed in the memory module slot on the base of the computer.
Page 59 Installing a memory module with the computer’s power on may damage the computer, the module, or both. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.
Page 60 Getting Started Adding memory Sample locating the memory module slot cover Using a standard Phillips No. 1 screwdriver, unscrew the screw that secures the memory module slot cover. Sample unscrewing the memory slot cover Remove the memory slot cover. Place the screw and the cover in a safe place so that you can retrieve them later.
Page 61 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer.
Page 62 Getting Started Adding memory Hold the memory module by its edges so that the gold connector bar faces the slot, at a slight angle to the socket. clip Sample inserting the memory module into the socket Check that the module is inserted completely into the socket and lined up squarely with the socket clips.
Page 63 clip Sample pressing down on the memory module connector until the clips snap into place Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. The clips on either side of the memory module snap into place when the memory module is properly inserted.
Page 64: Removing A Memory Module
Getting Started Adding memory Removing a memory module If you need to remove a memory module: Complete steps shut down the computer and open the memory module slot cover. Do not try to remove a memory module with the computer turned on.
Page 65: Connecting An External Usb Keyboard
Replace the memory module slot cover and tighten the screw. Turn the computer over and restart it. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Connecting an external USB keyboard You can attach an external standard keyboard to a USB port on your computer, provided the keyboard is USB-compatible.
Page 66: Connecting A Printer
Getting Started Connecting a printer Connecting a printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 67: Setting Up A Printer
Plug the printer’s power cable into a live electrical outlet. Setting up a printer Some printers require a specific installation process. Refer to NOTE your printer installation guide for instructions before completing the following procedure. If your printer does not support Plug and Play, follow these steps to set it up for the first time.
Page 68: Using Your Computer In Tablet Mode
Getting Started Using your computer in tablet mode Using your computer in tablet mode One of your computer’s features is a convertible display that allows you to use the screen much as you would a writing tablet. Sample rotating the screen To use your system in tablet mode, open your computer, carefully rotate the screen clockwise 180 degrees, and fold the screen down on top of the keyboard.
Page 69 Included with your computer is the Cross Menu application NOTE which allows you to make Hot Key assignments, access other Toshiba utilities, and create your own custom menus. For details on using the Cross Menu, refer to on page 180.
Page 70: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. To do this: Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer.
Page 71 Release the TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel and clicking Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, click Apply or OK.
Page 72: Adjusting The Quality Of The External Display
Getting Started Using external display devices Adjusting the quality of the external display To obtain the best picture quality from your external display device, you may need to adjust the video settings. See the documentation supplied with the device for additional configuration steps.
Page 73: Turning Off The Computer
TECHNICAL NOTE: You can also use the Cross-Functional button/Cross Menu utility to toggle between display resolutions. Press and hold the Cross-Functional button for 3 seconds, and then move over to the display icon. Press the Cross-Functional button to make your selection. You cannot rotate the display to any of the portrait modes if the resolution is set to 800 x 600.
Page 74: Closing The Display Panel
Getting Started Turning off the computer Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data. For more information, see page For more information, see page Closing the display panel When you are finished using the computer, power off and...
Page 75: Caring For Your Computer
Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s main battery, see page 124. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker grille and other openings. Never spray cleaner directly onto the computer.
Page 76: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Sample computer lock cable To secure the computer: Loop the cable through or around some part of a heavy object.
Page 77: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists computing tips and provides important information about the system’s basic features. Computing tips Save your work frequently. ❖ Your work temporarily stays in the computer’s memory until you save it to the hard disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 78 Learning the Basics Computing tips Back up your files to discs (or other removable storage ❖ media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 79: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just ❖...
Page 80: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard of the specially marked keys on your computer’s built-in keyboard allows you to emulate a full-size keyboard. The emulation Fn key and the Wake up on Keyboard while in NOTE Standby are only functional when using the internal keyboard; they are not supported when using a USB keyboard.
Page 81: Windows Special Keys
through programmed functions when pressed. Used in combination with the specific functions on the computer. For more information, see “Fn-esse” on page Hot keys When used in combination with the Fn key, function keys marked with icons run programmed functions specific to your computer.
Page 82 Learning the Basics Using the keyboard Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously.
Page 83: Starting A Program
To turn off the numeric overlay, hold down the press again. The numeric mode light on the keyboard indicator panel goes out. Using the cursor control overlay To turn on the cursor control overlay, press simultaneously. The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on.
Page 84: Starting A Program From The Start Menu
Learning the Basics Starting a program Use the Start menu ❖ Use Windows ❖ Use the Run dialog box ❖ The next three sections explain how to start a program from the Start menu, Explorer, and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu.
Page 85: Starting A Program From The Run Dialog Box
This example opens WordPad using Windows Explorer. Click Start, then point to All Programs. Click Accessories. Click Windows Explorer. In the left pane of the window, click My Computer to expand the window. In the left pane of the window, click Local Disk (C:). In the left pane of the window, click the folder containing the program, in this case Program Files.
Page 86: Saving Your Work
Learning the Basics Saving your work Sample Run dialog box In the Run dialog box: For a program in the Windows ❖ program name. Otherwise, if you know the program’s location, type the full file path. Then click OK. If you do not know the program’s location, you can ❖...
Page 87: Printing Your Work
Many programs offer a feature that saves documents at regular intervals, such as every 15 minutes. Check your programs’ documentation to see whether they have an automatic save feature. To save: A file you are updating, open the program’s File menu ❖...
Page 88: Using The Dvd-Rom Or Multi-Function Drive
Learning the Basics Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Page 89: Drive Components And Control Buttons
Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive is located on the right side of the computer. Your DVD-ROM or multi-function drive may look like this: Eject button Manual eject hole Sample DVD-ROM or multi-function drive shown Drive in-use indicator light—Indicates when the drive is in use.
Page 90: Inserting Discs (Cd Or Dvd)
Learning the Basics Using the DVD-ROM or multi-function drive Inserting discs (CD or DVD) To insert a disc into the drive: Make sure the computer is turned on. Make sure the drive-in-use indicator light is off. Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch).
Page 91 Using the DVD-ROM or multi-function drive Place the disc carefully in the disc tray, label side up. Sample positioning the disc in the drive Gently press the disc onto the center spindle until you feel it click into place. Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it.
Page 92: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or multi-function drive Playing an audio CD Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Page 93: Playing Cds Using Auto-Run
Using the DVD-ROM or multi-function drive Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: To play the CD or to pause, click the Play/Pause button ❖ on the CD Player control panel. To stop the CD, click the Stop button.
Page 94: Creating A Cd
Learning the Basics Using the DVD-ROM or multi-function drive example, if it is a music CD, open Windows and point it to play the CD. For other types of media, use the associated software to open the files on the disk. Creating a CD Depending on your computer’s configuration, your computer may come with a multi-function drive that allows you to:...
Page 95: Removing A Disc With The Computer Off
Using the DVD-ROM or multi-function drive Grasp the disc tray and pull it fully open. Remove the disc from the disc tray and place it in its protective cover. If the disc is spinning when you open the disc tray, wait for the disc to stop before removing it.
Page 96: Backing Up Your Work
Learning the Basics Backing up your work Avoid exposing discs to direct sunlight or extreme heat or ❖ cold. To clean a disc that is dirty, wipe it with a clean, dry ❖ cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle).
Page 97: Powering Down The Computer
online Help or your operating system documentation for information on restoring files. TECHNICAL NOTE: When restoring files, the backup program prompts you if you try to overwrite a file that already exists on the hard disk. Make sure the backup version is the one you want before overwriting the existing file.
Page 98: Turn Off Or Shut Down Command
Learning the Basics Powering down the computer Turn Off or Shut down command The Turn Off or Shut down commands power off the computer. The Windows system uses Turn Off if you are not connected to a Windows network server (domain server). It uses Shut down if you are connected to a Windows Factors to consider when choosing Turn Off or Shut down: No power is used while the computer is turned off.
Page 99: Stand By Command
Because the state of the system is held on the hard disk, ❖ no data is lost if the battery discharges while the computer is in Hibernation mode. ❖ When starting up again, this choice uses less time and battery power than the Turn Off or Shut down option. But it uses a little more time and battery power to start up than the Standby option, because information is being retrieved from the hard disk instead of from memory.
Page 100: Using Turn Off Or Shut Down
Learning the Basics Powering down the computer Using Turn Off or Shut down If you are not connected to a Windows (domain server), power off the computer as follows: To turn off the computer. Click Start, Turn off computer. The Turn off computer window appears. Sample Turn off computer window Click Turn Off.
Page 101 Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Click the Setup Action tab. Learning the Basics...
Page 102 Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, slide and release the power...
Page 103: Using Hibernation Mode
Using Hibernation mode Hibernation is a default setting. If it should become disabled, you can enable it as follows: Right-click the mouse on the Toshiba Power Saver icon located in the System Task Tray. Click Hibernate. Click Enable. Going into Hibernation mode...
Page 104 To set up your Hibernation options: Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. ® network server (domain “Hibernation mode” on page 245.
Page 105 Set this option to Hibernation so that the computer will go into Hibernation mode when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Learning the Basics Powering down the computer...
Page 106: Using Standby Mode
Learning the Basics Powering down the computer Starting again from Hibernation Use these instructions to restart the computer when you enter Standby mode by closing the display panel: AC power. Open the display panel. ❖ Battery power. Open the display panel and press the ❖...
Page 107 To set up your Standby options: Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Learning the Basics Powering down the computer 244.
Page 108 Learning the Basics Powering down the computer Sample TOSHIBA Power Saver Properties window Click to select a profile. Click the Setup Action tab. Sample Full Power Properties window...
Page 109: Toshiba's Online Resources
The computer returns to the screen you were previously using. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 110: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 111: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. See "Detailed Specs" for specific battery measurement test. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 112: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 113: Charging Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Battery charge time may vary depending on the applications, NOTE power management settings, and features used.
Page 114: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: The battery is extremely hot or cold. ❖ To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 115: Monitoring Main Battery Power
The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the computer. The RTC battery charges when the computer is powered on. If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working.
Page 116 Mobile Computing Monitoring main battery power Is unlit when the battery has discharged, the battery is not ❖ charging, or the AC adapter is not plugged into the computer or AC outlet. Battery life and charge time may vary, depending upon power NOTE management settings, applications and features used.
Page 117: Determining Remaining Battery Power
Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Toshiba Power Saver icon. The Power Saver Properties window appears. The remaining battery charge is indicated on the left side of the dialog box.
Page 118: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power power the computer for as long as a new battery, even when both are fully charged. TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 119: Setting Battery Alarms
To change the default alarm settings: Click Start, Control Panel, Performance and Maintenance, and then Toshiba Power Saver. Click the Setup Action tab. Configure the Alarm settings to suit your needs. Conserving battery power...
Page 120: Power Profiles
Mobile Computing Monitoring main battery power Toshiba has combined these options into preset Power Profiles. Using one of these profiles lets you choose between maximum power savings and peak system performance. You may also set individual power-saving options to suit your own needs.
Page 121: Using A Hot Key To Set The Power Profile
You may choose a power-saving management strategy to best suit your computing needs. If you are running on batteries and the programs that you are using do not require a lot of system resources, you may experience longer work sessions by enabling the Normal setting.
Page 122: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object. This could cause serious injury or fire, and could also damage the battery pack. Never expose a battery pack to abnormal shock, vibration or pressure.
Page 123: Inserting A Charged Battery
Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. Sample removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations.
Page 124: Taking Care Of Your Battery
Mobile Computing Taking care of your battery If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. Sample inserting the battery Turn the computer right side up.
Page 125: Maximizing Battery Life
❖ Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that ❖ you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all ❖...
Page 126 Mobile Computing Taking care of your battery Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4.
Page 127: Disposing Of Used Batteries
Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Mobile Computing Disposing of used batteries...
Page 128: Traveling Tips
Always travel with the computer in a carrying case. ❖ Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information.
Page 129: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows you several new features and enhancements, including: New system file protection ❖ A system restore function, allowing you to rollback the ❖...
Page 130: Personalizing Your Desktop
Exploring Your Computer’s Features Personalizing your desktop Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: Taskbar—which resources to display for quick access ❖...
Page 131 Exploring Your Computer’s Features Turning on the Web content interface The first step to bring active content to your desktop is to turn on the Web content interface: Point to an empty space on the desktop and click the secondary button. Click Properties.
Page 132: Changing Desktop And Browsing Style
Exploring Your Computer’s Features Personalizing your desktop To select some other Web site, type the address of the Web site you want or click Browse to locate it. You can configure the Web content interface in several other ways. For further information, see your operating system documentation or access Windows Help and Support.
Page 133: Personalizing Individual Windows
Sample Folder Options dialog box Click the preferred options. Click Apply, then OK. Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis.
Page 134 Exploring Your Computer’s Features Personalizing your desktop You can also add these toolbars to the taskbar. Address bar Sample toolbar locations The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Description Opens Web pages, programs, folders, or documents.
Page 135: Displaying Information About Each Folder
Toolbar element Standard buttons Displays buttons for commonly used Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display. The toolbar appears below the menu bar of the current window.
Page 136: Setting Up For Communications
Exploring Your Computer’s Features Setting up for communications Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page. Setting up for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another...
Page 137: Determining The Com Port
Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 138: Connecting The Modem To A Telephone Line
Exploring Your Computer’s Features Setting up for communications For more information regarding your system's V.92 modem, visit the Toshiba web site at Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem provides an RJ11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 139: Connecting Your Computer To A Network
Now you are ready to send a fax or use the modem to connect to an online service or the Internet. Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 140 Exploring Your Computer’s Features Setting up for communications Select Network Adapters, then select the appropriate network adapter. Right-click the Adapter and click Disable. Click Yes to confirm disabling the network card. Your LAN port is now disabled. Using Wireless LAN Connectivity The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment,...
Page 141: Accessing The Wireless Modules Using Your System Tray
Your Wi-Fi Mini PCI and Bluetooth modules are integrated into your computer system. It is recommended that you do not remove the modules from your computer. For assistance, contact a Toshiba Authorized Service Provider. ® Using Bluetooth The following information applies to those systems with the...
Page 142: An Overview Of Using The Internet
An overview of using the Internet Your Bluetooth module is based on the Bluetooth specification NOTE version 1.1. Toshiba cannot confirm compatibility with all PC products and/or electronic devices using Bluetooth other than Toshiba mobile PCs. An overview of using the Internet...
Page 143: Internet Service Providers
Special programs called Web browsers are specifically designed to work with HTTP. They make it easier to connect to a particular network address and send and receive information. Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP).
Page 144: Surfing The Internet
Exploring Your Computer’s Features An overview of using the Internet Start your Web browser. Have your modem dial the ISP’s telephone number, and establish a connection with the ISP’s computer. If you are using your computer at the office, then you probably connect to the Internet through your company’s network.
Page 145: Uploading And Downloading Files From The Internet
The computer plays sounds through the internal speaker. It uses the sound settings in your operating system, except for the system speaker, which is configured by the Toshiba System utility. To adjust the volume, click the speaker icon in the taskbar.
Page 146: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Using external speakers or headphones Before putting on headphones to listen to an audio CD, turn the volume dial down, and do not set the volume too high when using the headphones. Continuous exposure to loud sound can harm your hearing.
Page 147: Recording Sounds
Recording sounds An external microphone may be used with other software to record monaural audio sounds and save them as digital audio .WAV files on disk. DEFINITION: A .WAV (pronounced “wave”) file is one of the formats for storing sound in files. You may also record sounds as .WAV files by connecting other sound sources to the microphone jack.
Page 148: Using Tablet Mode
Exploring Your Computer’s Features Using tablet mode When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. The microphone on your computer might be set to Mute. To NOTE check this, click Start, point to All Programs, Accessories, Entertainment, and then click Volume Control.
Page 149 Exploring Your Computer’s Features Rotate the display panel clockwise 180 you complete this task, the screen clicks into place and faces away from the keyboard. When rotating your computer’s LCD screen, be sure to slowly turn the screen in the proper direction. Do not apply excessive force or speed.
Page 150: Using The Toshiba Tablet Pen
Any other orientation will display the external video resolution incorrectly. Using the Toshiba tablet pen Remove the Toshiba tablet pen which is located on the right side of the computer by momentarily pressing and then releasing. Pull the pen from the holder.
Page 151 Use the Toshiba tablet pen on the tablet as you would any pointing device or pen. Sample writing on the tablet You can also use tablet mode when the computer is in its original NOTE configuration, with the screen open and facing the keyboard.
Page 152: Returning The Computer To Its Original Configuration
Exploring Your Computer’s Features Using the i.LINK® port Use the Toshiba tablet pen as you would a mouse, or other pointing device. For example, you can execute “mouse type” commands in the same manner you normally would: ❖ To move the pointing icon (or cursor) on the tablet, lightly drag the Toshiba tablet pen across the tablet.
Page 153: Using Pc Cards
In addition to high speed, the i.LINK isochronous data transfer (the delivery of data at a guaranteed rate). This makes it ideal for devices that transfer high levels of data in real-time, such as video devices. As with USB ports, the i.LINK Play (automatic configuration) and hot swapping (the ability to connect and disconnect devices while the computer is on).
Page 154: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Sample inserting a PC Card When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Avoid forcing the card into position. Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray.
Page 155: Using An Optional Sd Card
For example: Never remove a hard disk card or CD-ROM drive card ❖ while the system is accessing the card. Never remove a network card while you are connected to ❖ the network. Never remove a SCSI card while any of the SCSI devices ❖...
Page 156: Inserting An Sd Card
Formatting an optional SD card To format an SD card, use the Toshiba SD Memory Card Format utility. Click on Start, All Programs, Toshiba, Utilities, and then click on SD Memory Card Format.
Page 157: Using Standby Or Hibernate While Using The Sd Card
Using Standby or Hibernate while using the SD card It is recommended that you do not select Standby or Hibernation mode while an SD card is in use. If you do so, your system may not enter Standby or Hibernation mode, some tasks may become unresponsive, and the operating system may not shut down properly.
Page 158: Removing A Module From The Slim Selectbay
HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit accessories.toshiba.com. Removing a module from the Slim SelectBay Use caution when lifting or turning your computer. Failure to...
Page 159: Inserting A Module Into The Slim Selectbay
Exploring Your Computer’s Features Using the Slim SelectBay® ® Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay, simply slide the module all the way into the Slim SelectBay until the latch locks into place.
Page 160: Chapter 5: Toshiba Utilities
❖ TOSHIBA Assist ❖ PC Diagnostic Tool ❖ HDD Protection Utility ❖ Power Management ❖ Hotkey utility ❖ TOSHIBA Hardware Setup ❖ ❖ TOSHIBA Mobile Extension TOSHIBA Accessibility ❖ TOSHIBA CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Button Controls Utility ❖...
Page 161: Fn-Esse
❖ TOSHIBA SD Memory Boot Utility ❖ Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files.
Page 162: Assigning A Key To A Program Or Document
Toshiba Utilities Fn-esse Sample Fn-esse keyboard The keys are color-coded as follows: Available keys are white. ❖ Assigned keys and keys associated with a popup list are ❖ shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are not shown.
Page 163 Using the pointing device, move the cursor over the ❖ desired key and press the secondary button. The Assignment Type dialog box appears. Follow the instructions in the assignment” on page 164 on page 164. Toshiba Utilities Fn-esse “Making a direct key “Making a popup assignment” key, then...
Page 164: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse Making a direct key assignment To make a direct key assignment, select Direct to display the Add/Edit Command dialog box, then complete these steps: Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information.
Page 165: Changing Or Removing Existing Key Assignments
To remove the key assignment, click Clear. TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access this utility: Click Start, All Programs, Toshiba, Utilities, then click Toshiba Assist.
Page 166: Connect
Toshiba Utilities TOSHIBA Assist Sample TOSHIBA Assist window The TOSHIBA Assist offers four categories of options: Connect ❖ ❖ Secure Protect and Fix ❖ Optimize ❖ Connect The options available in this category are: Connectivity Doctor ❖ Secure The options available in this category are: Supervisor password ❖...
Page 167: Protect And Fix
This utility can help diagnose problems with devices in your computer. Refer to the online help documentation within the application for additional help. To start the utility, click Start, All Programs, Toshiba, Utilities, then PC Diagnostic Tool. Toshiba Utilities TOSHIBA Assist...
Page 168: Hdd Protection Utility
Toshiba Utilities TOSHIBA Assist Sample PC Diagnostic Tool screen HDD Protection Utility Your computer comes with an application which can park the Hard Disk Drive whenever motion is detected on the computer. This utility is used to either disable or set the sensitivity of this application.
Page 169: Power Management
You can either use one of the preset profiles or create and use your own customized mode. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK, you can Toshiba Utilities...
Page 170 Toshiba Utilities TOSHIBA Assist reconfigure that function. Any options that you change become effective when you click either OK or Apply. Power Usage Profiles The preset profiles are: Long Life ❖ ❖ Normal High Power ❖ DVD Playback ❖ Presentation ❖...
Page 171: Hotkey Utility
The Hotkey utility allows you to receive a confirmation message when you use the hot key combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba, Utilities, then click Hotkey utility. The Hotkey window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Page 172 Toshiba Utilities Hotkey utility Sample TOSHIBA HWSetup window The TOSHIBA HWSetup window appears with tabs for the following: General — Allows you to view the current BIOS version ❖ or to change settings back to default. Device Config—Shows the Device configuration ❖...
Page 173: Toshiba Mobile Extension
TOSHIBA Mobile Extension To adjust the settings for docking or using the Slim ® SelectBay Configuration. To use the TOSHIBA Mobile Extension Service Configuration: Click Start, then Control Panel, then Performance and Maintenance. Click TOSHIBA Mobile Extension. The TOSHIBA Mobile Extension Service Configuration dialog box appears.
Page 174 Warm Undock Service and Notification Messages, by checking or unchecking the appropriate box. Sample TOSHIBA Mobile Extension Service tab options Under the Display Change Service tab, you can set the default display configuration you wish to use when docking the system to the optional Advanced Port Replicator III.
Page 175: Toshiba Accessibility
Sample Display Change Service tab options TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the Fn key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 176: Toshiba Cd/Dvd Drive Acoustic Silencer
Toshiba Utilities Hotkey utility TOSHIBA CD/DVD Drive Acoustic Silencer Sample TOSHIBA CD/DVD Drive Acoustic Silencer screen This utility can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable.
Page 177: Toshiba Button Controls Utility
Secondary portrait ❖ Secondary landscape ❖ To change the display format: Click Start, All Programs, Toshiba, Tablet PC, and then click Rotation Utility. The Toshiba Rotation Utility screen appears: OneNote button on the right side of the computer, Toshiba Utilities...
Page 178 Select a new display format for either PC mode or Tablet PC mode. Click OK. Toshiba recommends that you use the Toshiba Rotation Utility NOTE to change screen rotation options and settings for the tablet feature Tablet and Pen Settings.
Page 179 Toshiba Rotation Utility (see page 177) to change the screen’s orientation, and the Toshiba Power Saver Utility (click its icon in the System Tray) to adjust screen brightness. ❖...
Page 180: Cross Menu Utility
OK. Cross Menu Utility The Cross Menu Utility allows you to make Hot Key assignments to launch applications, access Toshiba utilities, or create your own custom menus. To start the Cross Menu Utility: Press and hold the Cross-Functional button for two seconds...
Page 181 Cross-Functional button. Creating a New Menu You can add up to five menus. NOTE To create a new menu: Click Start, All Programs, Toshiba, Tablet PC, and then Cross Menu. The Cross Menu Setting window appears. Toshiba Utilities Hotkey utility...
Page 182: Toshiba Tablet Access Code Utility
Open. When you have finished adding applications to the menu, click OK. TOSHIBA Tablet Access Code Utility This utility allows you to create and register an access code controlling who can log onto Windows. When creating and registering an access code, you can choose NOTE any character or symbol you want.
Page 183: Toshiba Zooming Utility
To access the utility: Click Start, All Programs, Toshiba, Tablet PC, and then Tablet Access Code Logon Utility. The Tablet Access Code Logon Utility screen appears. Sample TOSHIBA Tablet Access Code Logon Utility screen To create an access code, click New Registration.
Page 184: Toshiba Sd Memory Boot Utility
Help. TOSHIBA SD Memory Boot Utility In order to boot from an SD card, you must make the card SD card bootable. To do so, run the Toshiba SD Memory Boot Utility. The TOSHIBA SD Memory Boot Utility screen appears.
Page 185 Be sure to back up your data to external media before NOTE performing this procedure as data on the drive may be lost. Click Start, All Programs, Toshiba, Utilities, and then SD Memory Boot Utility. Select the drive where the SD is located.
Page 186: Chapter 6: Keeping Your Files Safe
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports the following types of passwords on your computer: ❖ A power-on password—Prevents unauthorized users from starting or restarting the computer.
Page 187: User-Level Passwords
HARD DISK AGAIN unless you have set a hard disk drive mas- ter password and you remember that password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
Page 188: Setting A User-Level Password
Password Utilities. Open the User Password tab. Click Delete. A Delete User Password dialog box appears. Type in the password and click Delete. Click OK at the bottom of the Toshiba Password Utility window. The user password is disabled.
Page 189: Using The Power-On (User-Level) Password
Using passwords in the Windows® operating system Using the power-on (user-level) password Whenever you start your computer with a power-on (user- level) password in effect, the computer prompts you to enter the password before it goes through its normal startup procedure.
Page 190: Setting A Hard Disk Drive User Only Password In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system it is removed and installed on another computer. This password does not encrypt data on the hard disk. Setting a hard disk drive master password lets you bypass ❖ the hard disk drive user password and access your hard disk, in case you forget the hard disk drive user password.
Page 191: Deleting Or Changing A Hard Disk Drive User Only Password In System Setup
Using passwords in the Windows® operating system illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press The System Setup screen appears. Press screen. Press the spacebar to select User Only password mode. Press the down arrow key to move to the User Password section.
Page 192: Setting A Hard Disk Drive Master And User Password In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system the following message appears on the screen: “Check system, Then press [F1] key,” press The System Setup screen appears. Press screen. Press the spacebar, then type in your user password and press Enter If you want to change the password, input the new...
Page 193 Using passwords in the Windows® operating system HINT: The hard disk drive shipped with your computer may not support the master password feature. When you attempt to set master password protection, your computer may alert you that this feature is not supported by your drive. If this happens and you want to establish a master password for your hard disk, contact your network administrator for instructions.To register master and user passwords in System Setup:...
Page 194: Changing The Master And User Passwords In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system Press When System Setup prompts you to confirm your change, Press Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: Click Start, then click Shutdown, and click OK.
Page 195 Using passwords in the Windows® operating system Deleting the hard disk drive master and user passwords in the System Setup HINT: You must delete the hard disk drive master password before you can delete the hard disk drive user password. To delete the master and user passwords in System Setup: Click Start, then click Shutdown, and click OK.
Page 196: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 197 The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working.
Page 198: Problems When You Turn On The Computer
If Something Goes Wrong Problems when you turn on the computer To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard.
Page 199 Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text, and try typing again.
Page 200: The Windows Operating System Is Not Working
If Something Goes Wrong The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in Standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 201: Using Startup Options To Fix Problems
The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 202: Internet Problems
If Something Goes Wrong The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 203: Resolving A Hardware Conflict
The device most recently connected to the system is the one most likely to be causing a hardware conflict. If Something Goes Wrong Resolving a hardware conflict pcsupport.toshiba.com Help and Support to troubleshoot the problem...
Page 204: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 205: Fixing A Problem With Device Manager
If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer.
Page 206 If Something Goes Wrong Resolving a hardware conflict Disabling a device Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category.
Page 207: Memory Problems
The operating system displays the Device Properties dialog box, which provides an array of tabs. They may include: The General tab, which provides basic information ❖ about the device. The Resource tab, which lists resources assigned to the ❖ monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions.
Page 208: Power And The Batteries
If Something Goes Wrong Resolving a hardware conflict Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 209 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. If Something Goes Wrong...
Page 210: Keyboard Problems
If Something Goes Wrong Resolving a hardware conflict current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging batteries” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 211: Display Problems
Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press any key, type the password and press no password is registered, press any key.
Page 212 If Something Goes Wrong Resolving a hardware conflict The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box.
Page 213: Disk Drive Problems
The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 214 If Something Goes Wrong Resolving a hardware conflict Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. On the pop-up menu, click Properties.
Page 215 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software. Consult your network administrator. Some programs run correctly but others do not. This is probably a configuration problem.
Page 216: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems You cannot access a disc in the drive. If the DVD-ROM or multi-function drive is an external drive, make sure that the drive’s cable is properly connected to the computer.
Page 217: Sound System Problems
Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only). If the problem is with a data CD or DVD, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 218 If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict” on page Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 219 Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start. Click My Computer icon with the secondary button, then click Properties.
Page 220 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the PC Card icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card.
Page 221: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 222: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba web site at 137. pcsupport.toshiba.com...
Page 223: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 224 If Something Goes Wrong Resolving a hardware conflict Check Control Panel's Device Manager to verify that the ❖ Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time.
Page 225 Use the PING command to verify a connection to the ❖ gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... Enter Cmd and press Enter. ❖ Enter PING 192.168.1.1 at the command prompt, and ❖...
Page 226: Dvd Operating Problems
If Something Goes Wrong DVD operating problems The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility. If it does, the utility may be disabling the Windows XP wireless management facility, in which case you must use the adapter's management utility.
Page 227 “Checking device properties” on page 206 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 228 If Something Goes Wrong DVD operating problems Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties.
Page 229: Develop Good Computing Habits
Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature. Save your work! See “Computing tips”...
Page 230: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Get familiar with all the user’s guides provided with your computer, as well as the manuals that come with the programs and devices you purchase. Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals.
Page 231 In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.” Then click Create. Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point.
Page 232 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 233 NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 234 If Something Goes Wrong Develop good computing habits Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear.
Page 235 General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser).
Page 236: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your ❖...
Page 237: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 238: Other Toshiba Internet Web Sites
If Something Goes Wrong Other Toshiba Internet Web sites For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca...
Page 239 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome...
Page 240: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 241: Password Security
Password security This hot key blanks the display. Without a password The Fn + F1 key combination turns off the display and activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user.
Page 242: Maintaining Security When The Battery Is Not Fully Charged
Hot Keys Password security If you clicked Choose a screen saver, the Screen Saver tab has already been selected. If it is not selected, click the Screen Saver tab. Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time.
Page 243: Power Usage Mode
This hot key displays the power usage pop-up window and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information, “Power Management” on page 169.
Page 244: Standby Mode
Hot Keys Standby mode Standby mode This hot key puts the computer into Standby mode. ❖ Sample Standby confirmation box ❖ A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box.
Page 245: Hibernation Mode
Hibernation mode This hot key puts the computer into Hibernation mode. ❖ Sample Hibernation confirmation box ❖ Hibernation mode If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box.
Page 246: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: ❖ ❖ ❖ Sample display options window In order to use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 247: Wireless Device Enable/Disable
Wireless device enable/disable This hot key enables and disables the optional wireless devices installed in your computer. The wireless modes are: ❖ ❖ ❖ ❖ Disabling or enabling the TouchPad This hot key enables/disables the TouchPad. For more information on using the TouchPad, see “Using the TouchPad™”...
Page 248: Keyboard Hot Keys
Zooming applications in/out This hot key turns the Zooming utility to zoom-out. For more information, see Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see on page “TOSHIBA Zooming 183. “TOSHIBA Zooming Utility” 183.
Page 249: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 250: Appendix C: Using Configfree With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 251: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. Double-click the ConfigFree icon ❖ Press the TOSHIBA Assist button (if applicable to your ❖ system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon ❖ click the desired utility. 265.
Page 252: Configfree Utilities
Getting Started If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 253: Configfree Utilities
Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer. The Connectivity Doctor works with the following network devices: ❖...
Page 254 ConfigFree Utilities Location of wireless communication switch (identified ❖ with a yellow arrow) Status of wireless communication switch (on or off) ❖ Sample Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 255 If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 256: Search For Wireless Devices
ConfigFree Utilities Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 257 Sample viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher. Drag and drop the device you want to connect to the PC icon at the center of the map.
Page 258 ConfigFree Utilities Sample dragging a device to the Access Point Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection NOTE list, the system displays the Connection screen rather than the Wireless settings screen.
Page 259 Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device. Sample viewing Bluetooth devices You can connect to devices shown on the Bluetooth map: Drag and drop the device you want to connect to the PC icon at the center of the map.
Page 260 ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 261: Profile Settings
Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line. The icon changes to a pair of scissors.
Page 262 ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: Internet settings —...
Page 263 Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings. (These options are unavailable if wireless devices have been disabled.) Under Execute this program after switching, click the Browse button and select the program, file, or Web site...
Page 264 ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 265: Configfree Summit
ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email. Use this utility, which handles files regardless of size, to distribute presentations, reports, or music files to meeting attendees or to users at different locations.
Page 266 ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. To share a file with one user, drag and drop the file on the ❖...
Page 267 Sample of sharing a file with one user To share a file with all users, drag the file to the center of ❖ the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center NOTE of the SUMMIT table, it will automatically be sent to all SUMMIT users who can then accept or decline the file as...
Page 268 ConfigFree Utilities Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window.
Page 269: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 270 ConfigFree Utilities To review the current Toshiba Wireless Projector settings and change them if necessary: Click the Move the mouse pointer to Toshiba Wireless Projector (DPJ), then click Settings. The Quick Connect properties dialog box appears. Complete the settings. Refer to the online help if necessary.
Page 271 The wireless LAN configuration returns to the settings that were last used before the Quick Connect function was started: If the Toshiba Wireless Projector utility is closed. ❖ If you select Toshiba Wireless Projector (DPJ) from the ❖ ConfigFree tray menu (this disconnects the wireless LAN connection).
Page 272: Using The Automatic Switch
Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 273 Right-click the Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles. Repeat the previous step for each additional profile you want to select.
Page 274: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 275 direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission gigabyte hard disk drive...
Page 276: Terms
Glossary SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 277 application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 278 Glossary byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
Page 279 controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 280 Glossary disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 281 DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD- ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 282 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 283 high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with the key can set system options or control system parameters, such as the battery save mode.
Page 284 Glossary liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 285 multi-function drive — A DVD drive that can read and write to CD and DVD media. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network —...
Page 286 Glossary peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer. Plug and Play —...
Page 287 resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically.
Page 288 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 289: Index
118 monitoring power 115 not charging 208 power usage hot key 121 real-time clock (RTC) 112 removing 122 BIOS Setup see TOSHIBA Hardware Setup Bluetooth 141 module 141 buttons CD Player 93 control 56 primary control 56 secondary control 56...
Page 290 Index Turn Off 98 communications network connection 139 system resources 204 compact discs removing 94 computer lock 76 non-system disk or disk error message 200 not accessing disk drives 199 running on battery power 110 setting up 46 warning resume message 199 computing tips 77 configuring...
Page 291 problems 216 troubleshooting 216 using 88 DVD-ROM or multi-function drive removing 94 DVD-ROM/multi-function drive problems 216 email 144 environment computer-friendly 42 error messages device driver conflict 203 general hardware problem 203 non-system disk or disk error problem with display settings/ current settings working with hardware...
Page 292 Index display modes 246 display output settings 70 hibernation mode 245 instant password 189 keyboard 248 password security 241 power usage mode 243 Standby mode 244 volume mute 240 wireless device enable/disable wireless mode 247 hot key power usage mode 121 Hot key utility 171 hot swapping 154 precautions 154...
Page 293 monitor adjusting display 72 connecting 70 not working 211 mouse connecting USB-compatible 65 moving the computer 75 network accessing 139 Dial-Up Networking Wizard optional additional equipment computer lock cable 76 other documentation 40 overlay cursor control 83 password creating 187 disabling 188 hard disk drive 187 instant 189...
Page 294 206 computer hangs when PC Card inserted 219 computer will not power up 198 contacting Toshiba 236 corrupted/damaged data files Device Manager 205 disabling a device 206 disk drive is slow 214 display is blank 211...
Page 295 175 stored data protection 2 taskbar toolbars Toshiba TOSHIBA Assist 165 disk drive Toshiba Hardware Setup 171 Toshiba tablet pen 150 TouchPad traveling tips 128 troubleshooting Turn Off Turn Off command 98 Turn Off methods 101 turning off the computer 73...
Page 296 65 User password 189 using Bluetooth 141 utilities Fn-esse 161 Hot key utility 171 Power Management 169 TOSHIBA Accessibility 175 volume control 145 warranty limited warranty 41 Web address 144 Web browsers 143 Web content interface 131 Web sites 237...

This manual is also suitable for:

R10-s820 R15-s822 R10-s804td R10-s802td R15-s8222 R15-s829 ... Show all

Toshiba R10-S613 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: Keeping Your Files Safe

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba R10-S613

Summary of Contents for Toshiba R10-S613