Christie DS+5K User Manual page 43

Copying or
Deleting Channels
Downloaded From projector-manual.com Christie Manuals
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press
other channels. See Copying or Deleting a Channel below.
•
Press
parameters) for the selected channel. See Editing a Channel Setup,
below.
'
TO COPY A CHANNEL
press to go to the Channel Copy/Delete submenu. Select "Copy" and press
Func
—a new channel will be created. It is identical to original, which still remains,
but it is identified with the next available number from 01-50. If you change your
mind and do not want to copy the current channel, press
the previous menu. Copying channels is a quick method for creating numerous
channels, each of which can then be edited and adjusted for a variety of presentations
in the future. See Figure 3.4.
TO DELETE A CHANNEL
then press to activate the Channel Copy/Delete submenu. Select "Delete" and
Func
press —a confirmation window will appear to make sure that you really want to
delete this channel. See Figure 3.5.
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Vid
Composite Video
Digital
if you want to copy the selected channel or delete this or
Func
if you want to edit channel setups (i.e., non-image related
, highlight the desired channel in the Channel Setup menu, then
Figure 3.4. Copying A Channel
, highlight the desired channel in the Channel Setup menu,
Section 3: Operation
To copy, delete or edit a channel,
to cancel and return to
Exit
User's Manual 3-17
.