Christie DS+5K User Manual page 50

Section 3: Operation
3-24 User's Manual
Downloaded From projector-manual.com Christie Manuals
BLANKING (TOP, BOTTOM, LEFT, and
Crop the image as desired so
RIGHT):
that unwanted edges are removed from
the display (changed to black—see
right). Blanking defines the size of the
Active Input Window, or area of
interest. Range of adjustment depends
on the source resolution and other
factors. After adjustment of blanking it
may be necessary to perform a source
switch.
NOTE: Blanking a PIP image
resembles zoom (see Figure 3.6). For
example, left Blanking zooms the right
side of the PIP image; Right Blanking
zooms the left side. There are no black
bars.
Figure 3.6. Blanking of a PIP Image
By default, a Plug & Play
PLUG & DISPLAY (EDID):
(EDID) source outputs a signal according to the EDID
information provided by the projector. To override this
information and display in a different format (for example,
if your Plug & Play [EDID] device does not support the
projector's resolution and/or frequency), select the desired
Plug & Play (EDID) resolution from the list.
Any daisy-chained projectors will also display according
to the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
Blanking of a Primary Image