Christie DS+5K User Manual page 35

,
Focus
Downloaded From projector-manual.com Christie Manuals
means that connected projector is listening; if there is no checkmark, you are
communicating with a different projector.
To control a specific projector with the keypad, press
number assigned to the projector you want to use. If you switch to a projector other
than the one you are currently using, the checkmark will disappear.
To broadcast to multiple projectors, press
projector number. Keypad commands will then affect all projectors present. Note that
there is no method of controlling a group of projectors within the same wired
configuration using the wired keypad exclusively, since there is only one wired
protocol available.
NOTES: 1) The "Broadcast Keys" option in the Communications menu must be
selected for only one (any) projector in a serial network. The keypad in use must be
OFF (disabled) for the remaining projectors. 2) See 3.6, Adjusting System
Parameters and Advanced Controls.
Enter
Press
adjustment and return to the previous menu or image.
Exit
Exit
Press
Exit
NOTE:
Exit
editing of a slide bar value) or within pull-down lists. It acts as a "cancel" in these
cases.
Arrow Keys
Use the
within a pull-down list without having to first scroll through options. See also Editing
Text later in Section 3.
Use the
Lens Focus, Zoom and Lens H, Lens V
, ,
Zoom Lens H Lens V
When adjusting the image for focus, zoom, horizontal and vertical positioning, use the
specific arrow keys (
window will appear to indicate the type of adjustment taking place. For example,
•
Use the "Focus"
•
Use the "Zoom" "
•
Use the "Lens H" "
still keeping it rectangular.
•
Use the "Lens V"
keeping it rectangular.
Press
Exit
to select a highlighted item, to toggle a checkbox, or to accept a parameter
to return to the previous level, such as the previous menu.
does not save changes within text editing boxes (including number
keys to change a slide bar value or to select a different option
keys to navigate within a menu, pull-down list or text box.
/ or
or
or
or
or
to return to presentation level.
Proj
and then enter the 3-digit
Proj and then Proj again without entering a
/ ) related to each function. A small
keys to improve image clarity as desired.
keys to achieve a desired image size.
keys to position the image horizontally while
keys to position the image vertically while still
User's Manual 3-9
Section 3: Operation
.