Christie DS+5K User Manual page 42

Section 3: Operation
What Channels
Are Defined So Far?
3-16 User's Manual
Downloaded From projector-manual.com Christie Manuals
NOTES: 1) The current
channel is highlighted upon
entering the channel list,
or, if this channel is not
displayed here, the first
channel in the list is
highlighted. 2) Channels
created automatically do
not appear in the channel
list unless a parameter for
the channel has been
changed.
All available channels are listed in the Channel Setup menu, which describes how
'
each channel can be accessed and which serves as the gateway for editing, copying
and deleting channels.
Press from the
Menu
presentation level to
display the Main menu.
To display the Channel
3
Setup menu, press
or move the highlight to
the Channel Setup option
and press . The
Channel Setup menu will
appear (see sample at
right), with the active channel highlighted.
WHAT APPEARS IN CHANNEL SETUP MENU?
lists all channels defined so far and indicates where they
are connected on the input panel. The far left column lists
channel numbers currently defined. The values in the far
right columns indicate horizontal and vertical
frequencies—if someone has defined a name for this
channel, it appears here instead. Remaining columns contain details pertaining to each
channel setup, such as its switcher number (always 0 = projector), slot location, a
variety of icons indicating access to each channel, and an abbreviated description of
each signal type. See Editing a Channel Setup for details.
NOTE: If you have more than a handful of channels, use
remaining channels not visible in the initial display of channels.
Either channel list, whether the
SIGNAL TYPE —
menu, identifies signal types in a shortened form as defined below. These descriptors
indicate what signal information the projector uses to identify a match for a given
channel, and are preceded by either an "i" (interlaced signals) or "p" (progressive
signal"). See Table 3.2.
,
All Channels Appear in the
Channel Setup Menu
This menu
Channel
and to see the
key list or the Channel Setup