Slide Position Sensors - Nokia N96 Service Manual

Hide thumbs Also See for N96:
Table of Contents

Advertisement

ROW1:
GPIO41
Down
ROW2:
GPIO42
ROW3:
GPIO43
ROW4:
GPIO44
End
ROW5:
Shutter
GPIO45
(H)
ROW6:
GPIO46
L-Soft
Row lines are filtered with Z4401 and column lines are filtered with Z4400. Power key is also placed on the
system/RF module. It is connected directly to EM ASIC N2200 PWRONX PIN.

Slide position sensors

Two Hall sensors are used to detect slide movement upwards or downwards. One magnet triggers both
sensors. The magnet is placed in the UI/slide module, under the display. The hall sensor, that detects opening
of the ITU keyboard, is on the bottom side of the PWB. Opening the multimedia keyboard is detected with
the hall sensor that is on the top of the PWB. Hall sensors are connected to the application ASIC (D4800)
GPIO's.
Page 7 –32
Right
>> (2)
1
5
<< (1)
9
Shutter
(F)
*
Stop (2)/
R-Soft
Gaming
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
<< (2)
Clear
6
8
7
#
0
3
2
4
Play (2)/
Gaming
Access
RM-247
System Module
Select
Stop (1)
Play (1)
>> (1)
Issue 1

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

L3L4

Table of Contents