RM-247
TV troubleshooting
6. Monitor the RSSI value in the Tuning Lock Summary field (see figure below).
7. CW test result > RSSI reading > The RSSI value should be within limits given in the following table.
Note:
CW test result > RSSI reading ("Signal Quality" feature is not needed).
Table 15 Setup and target test values
Frequency
Signal level
RSSI value
Tolerance
637
-30 dBm
-45dBm
+/-3dBm
Note:
Frequency in the table is typed in DVB-H Test/Frequency field. Set signal generator frequency always 1 MHz higher.
Galvanic DVB-H RF test measurement with module jig
Steps
1. Disassemble the phone.
Page 6 –10
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2008 Nokia. All rights reserved.