RM-247
TV troubleshooting
2. Place disassemble phone to module jig.
Figure 41 Phone disassembled and placed to jig
3. Connect cables to the jig.
4. Connect cable from Signal Generator to Module Jig DVB-H SMA connector.
5. Proceed the steps 2-7 according to chapter
RM-247 Galvanic DVB-H RF test measurement with FS-51
(page
6–8).
Frequency
Signal level
RSSI value
Tolerance
639
-30 dBm
-33 dBm
+/-3 dBm
DVB-H engine R5 measurement guide
Figure 42 DVB-H module
Issue 1
COMPANY CONFIDENTIAL
Page 6 –11
Copyright © 2008 Nokia. All rights reserved.